manualshive.com logo in svg

Hewlett Packard Enterprise ProLiant ML350 Gen10, Руководство пользователя

Сервер Hewlett Packard Enterprise ProLiant ML350 Gen10 - надежное и мощное решение для вашего бизнеса. У нас вы можете скачать бесплатно Руководство пользователя на manualshive.com. Получите подробное руководство по установке, настройке и обслуживанию этого устройства, чтобы повысить эффективность работы вашей компании.

Поделиться
Скачать
background image

HPE iLO 5

iLO 5 is a remote server management processor embedded on the system boards of HPE ProLiant servers and Synergy
compute modules. iLO enables the monitoring and controlling of servers from remote locations. iLO management is a
powerful tool that provides multiple ways to configure, update, monitor, and repair servers remotely. iLO (Standard)
comes preconfigured on Hewlett Packard Enterprise servers without an additional cost or license.

Features that enhance server administrator productivity and additional new security features are licensed. For more
information, see the iLO licensing guide at the following website: 

https://www.hpe.com/support/ilo-docs.

For more information about iLO, see the iLO user guide at the following website: 

https://www.hpe.com/support/ilo-

docs.

iLO Federation

iLO Federation enables you to manage multiple servers from one system using the iLO web interface.

When configured for iLO Federation, iLO uses multicast discovery and peer-to-peer communication to enable
communication between the systems in iLO Federation groups.

When you navigate to one of the iLO Federation pages, a data request is sent from the iLO system running the web
interface to its peers, and from those peers to other peers until all data for the selected iLO Federation group is retrieved.

iLO supports the following features:

• Group health status—View server health and model information.

• Group virtual media—Connect URL-based media for access by a group of servers.

• Group power control—Manage the power status of a group of servers.

• Group power capping—Set dynamic power caps for a group of servers.

• Group firmware update—Update the firmware of a group of servers.

• Group license installation—Enter a license key to activate iLO licensed features on a group of servers.

• Group configuration—Add iLO Federation group memberships for multiple iLO systems.

Any user can view information on iLO Federation pages, but a license is required for using the following features: Group
virtual media, Group power control, Group power capping, Group configuration, and Group firmware update.

For more information about iLO Federation, see the iLO user guide at the following website: 

https://www.hpe.com/

support/ilo-docs.

iLO Service Port

The Service Port is a USB port with the label 

iLO on supported servers and compute modules.

To find out if your server or compute module supports this feature, see the server specifications document at the
following website: 

https://www.hpe.com/info/qs.

When you have physical access to a server, you can use the Service Port to do the following:

• Download the Active Health System Log to a supported USB flash drive.

When you use this feature, the connected USB flash drive is not accessible by the host operating system.

• Connect a client (such as a laptop) with a supported USB to Ethernet adapter to access the following:

◦

iLO web interface

◦

Remote console

Software and configuration utilities

181

Содержание ProLiant ML350 Gen10























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant ML350 Gen10

Canon imagePRESS Server G200 Service Manual preview
imagePRESS Server G200
Бренд: Canon Страницы: 82
Canon P 400 Service Manual preview
P 400
Бренд: Canon Страницы: 88
D-Link ShareCenter Pro DNS-1200-05 Quick Installation Manual preview
ShareCenter Pro DNS-1200-05
Бренд: D-Link Страницы: 68
ACTi ACD-2200 Quick Installation Manual preview
ACD-2200
Бренд: ACTi Страницы: 15
Rasilient ApplianceStor 15MT User Manual preview
ApplianceStor 15MT
Бренд: Rasilient Страницы: 30
MAXDATA PLATINUM 1500 IR M5 User Manual preview
PLATINUM 1500 IR M5
Бренд: MAXDATA Страницы: 44
Supero SUPERSERVER 6113L-8 User Manual preview
SUPERSERVER 6113L-8
Бренд: Supero Страницы: 104
Supero SUPERSERVER 6017R-NTF User Manual preview
SUPERSERVER 6017R-NTF
Бренд: Supero Страницы: 126
Supero SuperServer 5017R-MF User Manual preview
SuperServer 5017R-MF
Бренд: Supero Страницы: 106
Supero SUPERSERVER 5015A-EHF User Manual preview
SUPERSERVER 5015A-EHF
Бренд: Supero Страницы: 106
Supero SuperServer 5013S-8 User Manual preview
SuperServer 5013S-8
Бренд: Supero Страницы: 110
Supero Supero SUPERSERVER 5015B-NT User Manual preview
Supero SUPERSERVER 5015B-NT
Бренд: Supero Страницы: 98
Supero 4042G-72RF4 User Manual preview
4042G-72RF4
Бренд: Supero Страницы: 122
Supero 2022TC-BIBQRF User Manual preview
2022TC-BIBQRF
Бренд: Supero Страницы: 121
Supermicro SuperStorage L-Serie Quick Reference Manual preview
SuperStorage L-Serie
Бренд: Supermicro Страницы: 1
Supermicro H8QG6+-F User Manual preview
H8QG6+-F
Бренд: Supermicro Страницы: 84
Supermicro SuperServer E302-9D User Manual preview
SuperServer E302-9D
Бренд: Supermicro Страницы: 124
Supermicro SUPERSERVER 6016T-NTRF4+ User Manual preview
SUPERSERVER 6016T-NTRF4+
Бренд: Supermicro Страницы: 122

Бренды по названию

Популярные бренды

Загрузить еще бренды