Hewlett Packard Enterprise ProLiant ML350 Gen10 Скачать руководство пользователя | Manualshive

Страница: 188 / 214

background image

IMPORTANT: Limited alerting and monitoring is available through iLO when HPE Agentless Management
Service is installed. The HPE Smart Array P824i-p MR Gen10 controller supports limited alerts through iLO
using the AMS agent.

•

Maintaining: Using MR Storage Administrator, you can perform system maintenance tasks, such as updating the
controller firmware.

•

Troubleshooting: MR Storage Administrator displays information related to drive failures, device failures, and other
issues. It also provides recommendations and displays contextual links, helping you to locate the drives/devices that
have issues and troubleshoot them. You can also download a report of the devices and their configurations, properties,
and settings and send it to Hewlett Packard Enterprise Support for further troubleshooting.

Obtain MR Storage Administrator installation files through the Service Pack for ProLiant, or SPP, which you can download
from the Hewlett Packard Enterprise website (

https://www.hpe.com/servers/spp/download). Be sure to use the latest

SPP version for the server.

For more information about the MR Storage Administrator, see MR Storage Administrator User Guide on the Hewlett
Packard Enterprise website (

https://www.hpe.com/info/P824i-pdocs).

HPE InfoSight for servers

The HPE InfoSight portal is a secure web interface hosted by HPE that allows you to monitor supported devices through a
graphical interface.

HPE InfoSight for servers:

• Combines the machine learning and predictive analytics of HPE InfoSight with the health and performance monitoring

of Active Health System (AHS) and HPE iLO to optimize performance and predict and prevent problems

• Provides automatic collection and analysis of the sensor and telemetry data from AHS to derive insights from the

behaviors of the install base to provide recommendations to resolve problems and improve performance

For more information on getting started and using HPE InfoSight for servers, go to:

https://www.hpe.com/info/

infosight-servers-docs.

StorCLI

The Storage Command Line Interface (StorCLI) tool is the command line management software designed for the HPE
Smart Array MR controller. StorCLI is a command line interface that is designed to be easy to use, consistent, and easy to
script.

Obtain StorCLI through the Service Pack for ProLiant, or SPP, which you can download from

https://www.hpe.com/

servers/spp/download. Be sure to use the latest SPP version for the server.

For more information about StorCLI, see StorCLI User Guide on the Hewlett Packard Enterprise website

www.hpe.com/info/P824i-pdocs.

USB support

Hewlett Packard Enterprise Gen10 and Gen10 Plus servers support all USB operating speeds depending on the device
that is connected to the server.

188

Software and configuration utilities

«
...
186
187
188
189
190
...
»

Содержание ProLiant ML350 Gen10























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant ML350 Gen10

BladeCenter PN41

Бренд: IBM Страницы: 88

SuperServer 6041G

Бренд: Supero Страницы: 114

N2400 - TaskSmart - 1 GB RAM

Бренд: Compaq Страницы: 372

Бренд: Hanwha Vision Страницы: 16

SPARC Enterprise M3000

Бренд: Fujitsu Страницы: 202

SPARC Enterprise M4000

Бренд: Fujitsu Страницы: 310

SPARC Enterprise M3000

Бренд: Fujitsu Страницы: 560

SPARC Enterprise M4000

Бренд: Fujitsu Страницы: 76

Бренд: Tiger Technology Страницы: 29

Бренд: Edimax Страницы: 14

Бренд: Super Страницы: 60

DeviceMaster LT

Бренд: Comtrol Страницы: 136

Бренд: IBM Страницы: 68

206m - eServer xSeries - 8485

Бренд: IBM Страницы: 92

Бренд: TAG Страницы: 50

Rackable C2005 2U

Бренд: Silicon Graphics Страницы: 46

Бренд: Silicon Graphics Страницы: 162

Бренд: Inspur Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды