HBM WTX110, Руководство по эксплуатации

Страница: 75 / 436

Service mode
WTX110
A4774-1.0 HBM: public
73
→Protocol AckNak or NoAck selected
Com1: Start char. 999
Enter the start character as a decimal value
(e.g. 2 = STX)
If you enter 0 no start character will be transferred
Com1: End char. 999 Enter the end character as a decimal value
(e.g. 3 = STX)
If you enter
0
no end character will be transferred
Com1: Checksum None
Select checksum formation; the checksum is
transferred after the end character:
None No checksum
XOR
Exclusive-Or combination
CPL
Two's complement
→If start or end character entered and a checksum selected:
Com1: With start N Start character is included in checksum formation
Com1: With end N
End character is included in checksum formation
6.1.3 Setting the serial interface (
Com6 (DWB1)
)
Menu Key Function/Secondary selection
Interface Com6 (DWB1)
K-WTX110-D-***-**-***-**-***-**
6.2 Enter parameter (
General
)
For more information on the keys necessary to access this menu group, go to
the
Navigation Pilot .
In this menu group you can set various parameters, such as the language, time
zone, date, time, etc.