HBM WTX110, Руководство по эксплуатации

Страница: 12 / 436

Safety instructions
10
A4774-1.0 HBM: public
WTX110
Operating conditions
S
Protect the device from direct contact with water.
S
Protect the device from moisture and weather such as rain or snow. The
protection class of the device (front panel after installation) is IP69K
(DIN EN 60529).
S
The device is designed for use in industrial environments and conforms with
Class A in accordance with DIN EN55011.
S
Do not expose the device to direct sunlight.
S
Comply with the maximum permissible ambient temperatures and the
specifications regarding maximum humidity.
S
The device must not be modified in terms of design or safety engineering
except with our express agreement. In particular, any repair or soldering
work on motherboards (replacement of components) is prohibited. When
exchanging complete modules, use only original parts from HBM.
S
The device is supplied ex works with a fixed hardware and software
configuration. Changes can only be made within the range of possibilities
described in the corresponding documentation.
S
The device is largely maintenance-free.
S
Please note the following when cleaning the housing:
- Disconnect the device from all current and voltage supplies.
- Clean the housing with a soft, slightly damp (not wet!) cloth. Never use
solvent, as this could damage the label or the housing.
- When cleaning, ensure that no liquid gets into the device or connections.
S
The device has a configurable On/Off key. If the key is deactivated, the
device is ready for operation immediately after the power supply network is
connected. Please read the corresponding section in the technical manual.
S
The local input voltage must match the input voltage of the device.
S
In accordance with national and local environmental protection and material
recovery and recycling regulations, old devices that can no longer be used
must be disposed of separately and not with normal household garbage.