HBM WTX110, Руководство по эксплуатации

Страница: 172 / 436

Calibration
170
A4774-1.0 HBM: public
WTX110
Low Capacity 999999 Enter the maximum load of the lowest range.
Example: Low Capacity 1500
If the Low Capacity value is greater than Mid
Capacity
, the error message
Entry Not Valid!
is
displayed.
Low Int. 999.9999 Enter the scale interval of the lowest range.
Example:
Low Int. 1.0000
The error message Entry Not Valid! is
displayed if you enter an invalid scale interval.
Menu Key Function/Secondary selection
Unit kg Specify the unit of measurement symbol
kg kilogram
g
gram
t
metric ton
lb pound
Back to Select Group
11.5 Calibration
For more information on the keys necessary to access this menu group, go to
the
Navigation Pilot .
The scale is calibrated with this menu group. In addition to calibration at full
load, part load calibration is also possible. If you want to move the scale to a
different location after calibrating it, you can use the geo value to compensate
for the differing gravitational pull, without having to recalibrate the scale (not for
applications subject to weights and measures legislation). Precalibration
without weights is also possible by entering the standardized signal (mV/V).
Example of calibration of a tank weigher: