GW Instek GSM-20H10, Руководство пользователя

Страница: 354 / 374

COMMAND SYNTAX
352
· Bit B0, Measurement Summary Bit (MSB) — Set summary
bit indicates that an enabled measurement event has
occurred.
·
Bit B1 — Not used.
·
Bit B2, Error Available (EAV) — Set summary bit indicates
that an error or status message is present in the Error
Queue.
·
Bit B3, Questionable Summary Bit (QSB) — Set summary
bit indicates that an enabled questionable event has
occurred.
·
Bit B4, Message Available (MAV) — Set summary bit
indicates that a response message is present in the Output
Queue.
·
Bit B5, Event Summary Bit (ESB) — Set summary bit
indicates that an enabled standard event has occurred.
·
Bit B6, Request Service (RQS)/Master Summary Status
(MSS) — Set bit indicates that an enabled summary bit of
the Status Byte Register is set.
·
Bit B7, Operation Summary (OSB) — Set summary bit
indicates that an enabled operation event has occurred.
•
Service request enable register
The generation of a service request is controlled by the Service
Request Enable Register. This register is programmed by you
and is used to enable or disable the setting of bit B6 (RQS/MSS)
by the Status Summary Message bits (B0, B2, B3, B4, B5, and B7)
of the Status Byte Register. The individual bits of the Service
Request Enable Register can be set or cleared by using the *SRE
common Command. To read the Service Request Enable
Register, use the *SRE? query Command. The Service Request
Enable Register clears when power is cycled or a parameter
value of 0 is sent with the *SRE Command (i.e. *SRE 0).
Status Register Sets