GW Instek GSM-20H10, Руководство пользователя

Страница: 332 / 374

COMMAND SYNTAX
330
Function This query Command is used to determine how
many stored readings are in the buffer. After sending
this Command and addressing the unit to talk, the
number of readings stored in the buffer will be sent
to the computer.
Example :TRACe:POINts:ACTual?
Command
:TRACe:FEED <name>
Function This Command is used to select the source of
readings to be placed in the buffer. With SENSe[1]
selected, raw readings are placed in the buffer when
storage is performed. With CALCulate[1] selected,
math expression results (Calc1) are placed in the
buffer. With CALCulate2 selected, Calc2 readings are
placed in the buffer. TRACe:FEED cannot be
changed while buffer storage is active.
<name> = SENSe1 Put raw readings in buffer
CALCulate1 Put Calc1 readings in buffer
CALCulate2 Put Calc2 readings in buffer
Example :TRACe:FEED SENSe1
Command
:TRACe:FEED?
Function Query buffer feed
Example :TRACe:FEED?
Command
:TRACe:FEED:CONTrol <name>
Function
This Command is used to select the buffer control.
When NEXT is selected, the asterisk (*) annunciator
turns on to indicate that the buffer is enabled. The
storage process starts when GSM is taken out of idle
to perform source-measure operations.