GW Instek GSM-20H10, Руководство пользователя

Страница: 344 / 374

COMMAND SYNTAX
342
This Command is used to select output lines for the
Trigger Link. For normal operation, Trigger Link
input and output should not share the same line.
<NRf> = 1 Line #1
2 Line #2
3 Line #3
4 Line #4
Example :TRIGger:OLINe 1
Command
:TRIGger[:SEQuence[1]][:TCONfigure]:OLINe?
Function Query output trigger line
Example :TRIGger:OLINe?
Command
:ARM[:SEQuence[1]][LAYer[1]][:TCONfigure]:OUTP
ut <event list>
Function This Command is used to specify when trigger
pulses occur on the specified output trigger line of
the Trigger Link.
Arm Layer Triggers — With TEXit selected, an
output trigger will occur when exiting the trigger
layer. With TENTer selected, an output trigger will
occur when entering the trigger layer. With NONE
selected, the arm layer output trigger is disabled.
Arm Layer Triggers
<event list >: TENTer Trigger on entering
trigger layer
TEXit Trigger on exiting
trigger layer
NONE Disable arm layer
output trigger