GSK GSK218MC, Руководство пользователя

Страница: 253 / 336

Official GSK Agents in South Africa
Tel: +27 11 626 2720, design@efamatic.com
Chapter Four Machine Debugging
237
V
o
lume IV
Inst
allation &
Connecti
on
=0: Pulse and Ethernet are not used at the same time.
MSP =1: Use the double spindle control
=0: Do not use the double spindle control
SVCD
=1: Use the axis extension card
=0: Do not use the axis extension card
System parameter number
0 0 1 RAS5 RAS4 RAS3 RAS2 RAS1 SBUS RASA
RASA
=1: Use the absolute grating rule
=0: Do not use the absolute grating rule
SBUS =1: Spindle driver is the bus control method
=0: Spindle driver is not the bus control method
RAS1
=1: Set the 1
st
axis with the grating rule
=0: Set the 1
st
axis without the grating rule
RAS2 =1: Set the 2
nd
axis with the grating rule
=1: Set the 2
nd
axis without the grating rule
RAS3
=1: Set the 3
rd
axis with grating rule
=1: Set the 3
rd
axis without the grating rule
RAS4 =1: Set the 4
th
axis with grating rule
=0: Set the 4
th
axis without grating rule
RAS5
=1: Set the 5
th
axis with grating rule
=0: Set the 5
th
axis without grating rule
System parameter number
0 0 5 DOUS
DOUS =1: Dual-drive tool with grating position
=0: Dual-drive tool without grating position
System parameter number
0 2 0 UHSM APC MAPC
MAPC =1: Select the multi-coil absolute encoder
=0: Select the single-coil absolute encoder
APC =1: Use the absolute encoder
=0: Do not use the absolute encoder
UHSM =1: Directly set the machine zero by hand