Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC & Installation Connection Manual
78
Volume II
Operatio
n
2.5 Command Table
In the PLCGRA interface, as the
Fig. 2-1-1
. Press the
[Command table]
soft key again, and
then enter the command table classification operation interface, refer to the
Fig. 2-5-1
.
Fig. 2-5-1
The content and operation of the command list:
1/3070:
Offer the steps and total steps information of in the current operation of the ladder
diagram.
RUN:
the operation state of the ladder diagram
Input:
Display the input data.
MDI mode:
current working method.
[Conversion]
: Ladder diagram converts to the command list.
[Download]
: Download the command list to the CNC, automatically operate the PLC ladder
diagram.
[Stop]
: Stop the operation of the ladder diagram.
[Return]
: Return to the previous menu.
The positioning can be performed by the page-up, page-down and four direction keys, and then
check the command list.
