Official GSK Agents in South Africa
Tel: +27 11 626 2720, [email protected]
GSK218MC Series Machining Center CNC System PLC&Installation Connetion Manual
320
Appendix
are identical.
IV. The Code and Meaning of the Y Signal Y0.0---Y5.7
Format:
Yxxxx + Space + Chinese note + Enter character (Enter)
For example:
“Y0000 Z axis brake”
Wherein:
“xxxx” means the value of the Y signal, for example: “0000 means 0.0”, “0057 means
5.7”, it is from 0000 to 0057 in turn (that is, the Y signal is from 0.0 to 5.7) and its sequence can not
be altered.
V. The Code and Meaning of the K Signal K6.0---K63.7
Format:
Kxxxx + Space + Chinese note + Enter character (Enter)
For example:
“K0060 Whether uses one X axis limit switch”
Wherein:
“xxxx” means the value of the K signal, for example: “0060 means 6.0”, “0637 means
63.7”, it is from 0060 to 0637 in turn (that is, K signal is from 6.0 to 63.7) and its sequence can not be
altered.
Normally, the “Space” is 5 spaces and can not add other characters.
VI. The Code and Meaning of the A Signal A0.0---A31.7
Format:
Axxxx + Space + Chinese note + Enter character (Enter)
For example:
“A0000 Air pressure detection abnormality”
Wherein:
“
xxxx
” means the value of A signal, for example “
0000
means
0.0
” “
0317
means
31.7
”, it is from
0000
to
0317
in turn (that is,
A
signal is from
0.0
to
31.7
) and its sequence can not be
altered.
Normally, the “Space” is 5 spaces and can not add other characters.
VII. end//End Mark
Note
: The above-mentioned information should be written at the top of the line; refer to the in-built
file LadChixx.txt for details. The unique difference in the corresponding English file
LadEng01.txt is that the Chinese notes are changed into 32 English letters or characters.
