Fukuda Denshi DynaScope 7000 Series, Руководство по обслуживанию

Страница: 103 / 143

2) Test Printing
*This adjustment should be performed in room temperature.
1 Press the Print Test key.
→ Check that “Yes” is displayed.
2 Verify the printing result in accordance with the following judgment criteria.
Printhead Voltage
1st Page Judgment Criteria
There should be no patches inside the
blocks.
Printhead voltage
Printhead Contact
1st Page Judgment Criteria
Thin horizontal lines should be evenly
printed.
Horizontal Lines
Damaged Printhead
2nd Page Judgment Criteria
All vertical lines should be printed evenly
and any horizontal dots lines (inside grid)
should not be missing.
Vertical Lines and Grid
Focus
3rd Page Judgment Criteria
Print
The printed letters should be clearly visible.
Recording Speed
4, 5th Page Judgment Criteria
With 10cm adjusted to scale, printing should
be within
±
3mm.
Recording Speed
3 After completion, press the Prev. Disp. key twice.
The recorder adjustment details will be stored in the flash memory.
Note
The test printing will be performed for 25mm.
To stop printing at any time, press the Print Test key again.
If the print is too dark or too light, adjust the printing by using the + – keys of “Thermal Head
Strobe Duration Adjustment”.
(If the printing is suitable, this adjustment is not necessary.)
After the adjustment, press the Print Test key again, and check if the printing is properly
performed.
7
－
11