Farm King Model 1050 Скачать руководство пользователя страница 81

Страница: 81 / 174

Operation - 10" Backsaver Auger

Figure 134

Move the belly dump unit forward until the rear

compartment is directly over the hopper (Item 1)

[Figure 134]

With tractor running at a low idle, engage the tractor

PTO slowly to start the auger. Increase engine RPM

(do not exceed 540 RPM PTO speed).
Slowly open the rear compartment gate.
Adjust gate until the hopper augers and intake auger

can move grain to the main auger without overflowing

the hopper.
When the rear compartment is empty, close the gate,

disengage the PTO and lower engine RPM speed.

Figure 135

Move the belly dump unit back until the front

compartment is directly over the hopper (Item 1)

[Figure 135]

With tractor running at a low idle, engage the tractor

PTO slowly to start the auger. Increase engine RPM

(do not exceed 540 RPM PTO speed).

Slowly open the front compartment gate.
Adjust gate until the hopper augers and intake auger

can move grain to the main auger without overflowing

the hopper.
When the front compartment is empty, close the gate,

disengage the PTO and lower engine RPM speed.

Move the hopper in the desired position away from

vehicle traffic.

Disengage the tractor hydraulics and exit the tractor.

B-0538

•

Do NOT exceed 540 RPM PTO.

•

Keep PTO shields and all guards in place.

•

Keep away from moving parts.

•

Keep bystanders away.

B-0539

•

Do NOT exceed 540 RPM PTO.

•

Keep PTO shields and all guards in place.

•

Keep away from moving parts.

•

Keep bystanders away.

Содержание Model 1050















































































































































































Результаты поиска

Содержание Model 1050

Отзывы:

Бренды по названию

Популярные бренды

Farm King Model 1050, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание Model 1050

Отзывы:

Бренды по названию

Популярные бренды