Emerson Rosemount 5900S Series, Справочное руководство

Страница: 85 / 298

Table 3-9: Conductor Cross-sectional Area
Conductor connection Cross-section
Minimum Maximum
Solid 0.2 mm
2
/ AWG 24 1.5 mm
2
/AWG16
Flexible 0.2 mm
2
/ AWG 24 1.5 mm
2
/AWG16
With wire end ferrule 0.25 mm
2
/ AWG 24 1.5 mm
2
/AWG16
With plastic collar ferrule 0.25 mm
2
/ AWG 24 0.75 mm
2
/AWG19
In case conductor insulation diameter exceeds 2.9 mm it may not be possible to insert
cable properly into the terminal block. In such a case the stripping length may have to be
increased. Adjust stripping length such that no bare conductor appears outside the
terminal when conductor is attached to the terminal block.
A solid conductor, or a flexible conductor with end ferrule, can easily be pushed into the
terminal block without using any tools. In case a flexible (stranded) conductor is used, you
will have to push the release button in order to insert the conductor.
Figure 3-25: Push the Conductor Into the Terminal Block
$
%
&
A. Terminal block
B. Release buttons
C. Conductor
To disconnect, push the release button and remove the conductor.
Reference Manual Installation
00809-0100-5900 September 2019
Rosemount 5900S Radar Level Gauge 85