manualshive.com logo in svg

Emerson Rosemount 5900S Series, Справочное руководство

Поделиться
Скачать
Emerson Rosemount 5900S Series Скачать руководство пользователя страница 190

6.2.2

Backing up the level gauge configuration

Input and holding registers for the Rosemount 5900S Radar Level Gauge can be stored on
disk. This can be useful for backup purposes and troubleshooting. You can save a
predefined set of holding registers to make a backup copy of the current gauge
configuration. The backup file can be used to restore the level gauge configuration.

Backing up a device configuration using TankMaster

™

Using Rosemount TankMaster WinSetup to save the current device configuration to file:

Procedure

1. Start the Rosemount TankMaster WinSetup program.
2. In the 

TankMaster WinSetup

 workspace window, right-click the device icon.

3. Choose the 

Save Database to File

 option.

This option is also available from the 

Service/Devices

 menu.

4. Choose the 

Holding Registers

 and 

Predefined Registers

 options (the User-Defined

option should only be used for advanced service).

5. Click the 

Browse

 button, select a folder and type a name for the backup file.

6. Click the 

Save

 button to start saving the database registers.

Service and troubleshooting

Reference Manual

September 2019

00809-0100-5900

190

Reference Manual

Содержание Rosemount 5900S Series











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды