Emerson Rosemount 5900S Series, Справочное руководство

Страница: 211 / 298

Table 6-4: Error Messages for the Rosemount 5900S
(continued)
Message Description Action
Database (Hreg) error Input register no. 6004.
An error in the transmitter
configuration memory (EEPROM) has
been detected. The error is either a
checksum error that can be solved by
loading the default database or a
hardware error.
Note
The default values are used until the
problem is solved.
The following bits indicate a serious
Holding register problem:
Bit 0: DSP checksum
Bit 1: DSP limit
Bit 2: DSP version
Bit 3: Write error
Load default database and restart the
Rosemount 5900S Radar Level Gauge.
Contact Emerson Automation
Solutions /Rosemount Tank Gauging
service department if the problem
persists.
Other Memory error Input register no. 6006. Contact Emerson Automation
Solutions /Rosemount Tank Gauging
service department.
Microwave Module error Input register no. 6008.
Bit 0: Not connected
RM error Input register no. 6010
Bit 1: SW configuration
Bit 5: FPROM Checksum
Bit 6: FPROM Version
Bit 9: HREG Checksum
Bit 10: HREG Limit
Bit 11: HREG Write
Bit 12: HREG Read
Bit 13: HREG Version
Bit 14: MWM Invalid Id
Bit 30: SW Serious Error
Other hardware error Input register no. 6022.
An unspecified hardware error has
been detected.
Bit 0: Internal Temp Out of Range
Reference Manual Service and troubleshooting
00809-0100-5900 September 2019
Rosemount 5900S Radar Level Gauge 211