Emerson Rosemount 5900S Series, Справочное руководство

Страница: 287 / 298

Table C-16: Volume Transducer Block Parameters
(continued)
Index
Number Parameter Description
10 TRANSDUCER_TYPE Identifies the transducer.
11 TRANSDUCER_TYPE_VER
12 XD_ERROR A transducer block alarm sub code.
13 COLLECTION_DIRECTORY A directory that specifies the number, starting
indices, and DD Item ID’s of the data collections in
each transducer within a transducer block.
14 LENGTH_UNIT Same as in measurement transducer block
15 VOLUME_UNIT Same as in measurement transducer block
16 VOLUME Calculated volume and status
17 VOLUME_STATUS Detailed status
18 LEVEL Used level value
19 VOLUME_ CALC_METHOD Used volume calculation method
20 VOLUME_IDEAL_DIAMETER Diameter for pre-defined standard tank type
21 VOLUME_IDEAL_LENGTH Length for pre-defined standard tank type
22 VOLUME_OFFSET Lets you use a non-zero volume for the zero level. Can
be used in case you want to include the product
volume below the zero level.
23 VOLUME_INTERPOLATE_MET
HOD Interpolation method for levels between strapping
table points
24 VOLUME_
STRAP_TABLE_LENGTH Number of strapping table points
25 STRAP_LEVEL_1_30 Level values for strapping points 1 to 30
26 STRAP_VOLUME_1_30 Volume values for strapping points 1 to 30
C.6 Register Transducer block
The Register Transducer block allows access to Database registers and Input registers. This
makes it possible to read a selected set of register directly by accessing the memory
location.
The Register Transducer block is only available with advanced service.
CAUTION
Since the Register Transducer block allows access to most registers, it should be handled
with care and ONLY to be changed by trained and certified service personnel, or as guided
by Emerson Automation Solutions support personnel.
Reference Manual F
OUNDATION
™
Fieldbus Block Information
00809-0100-5900 September 2019
Rosemount 5900S Radar Level Gauge 287