Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 95 / 106

SIMS PRO
95
the plate, but the indication selection box outlines remain visible since they are still selected.
Edit
Click Edit on the indication ribbon to alter the percentage values of the selected indications and set
their status to accepted. The percentage values of the selected indications can be edited in one of
two ways:
1. Set all selected indications to the same prove-up value.
a. Select Set Prove-up value .
b. Enter a prove-up value in the dialogue box to set all indications too.
c. Click OK .
Figure 129: Edit indication by prove-up
NOTE
If indication percentages are edited to be outside of the current plate threshold range the
indications are no longer shown on the plate, but the indication selection box outlines remain
visible since they are still selected.
2. Alter the selected indications by increasing or decreasing each indication by a set percentage
variation.
a. Select Apply percentage variation .
b. Enter a variation value to alter each indication percentage by.
c. Click OK .
Figure 130: Edit indications by a percentage variation
NOTE
If indication percentages are edited to be outside of the current plate threshold range the
indications are no longer shown on the plate, but the indication selection box outlines remain
visible since they are still selected.
Top
Click Top on the indication ribbon to set the surface origin of the selected indications to become top
and set the status to accepted.