Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 99 / 106

Troubleshooting and Maintenance
99
6. Maintenance
6.1 FloormapX system precautions
•
Do not immerse FloormapX.
• The system is rain shower resistant. Do not leave in rain for prolonged periods, wipe system dry
after wetting, do not spray with a hose or immerse in water/ wade in puddles. Although the
system may tolerate standing water less than 10mm deep, all puddles should be avoided by
sweeping standing water away with a suitable brush.
•
Always follow general precautions and safety precautions during maintenance of the system.
•
Keep all connectors free from dirt and moisture.
6.2 Transportation and Storage
Receiving and Inspection
For transport purposes the FloormapX system is delivered within 2 black transit cases strapped to a
pallet. Any transport work may only be carried out by appropriately trained personnel.
On receipt of the system, carefully check it for any damage that may have occurred during shipping.
The transport company is responsible for damage that occurs during transport. If there appears to
be damage, carefully inspect the system components for any further damage and check that all
components correspond to the packing list. In the event of damage, notify the transport company
immediately and keep the packaging as evidence. A full report describing the damage in detail must
be submitted to the transport company and serves as the basis for the damage claim.
Damage or loss of goods delivered must be reported immediately to Eddyfi and confirmed by a copy
of the above-mentioned report. If the operating manual is removed, do not lose, or misplace it.
Unpacking
The FloormapX system is packaged in two transit cases. Care should be taken when unpacking the
FloormapX system, any markings or warnings shown on the packaging should be observed prior to
opening. The following steps should then be taken:
•
Unpack the FloormapX system in a dry area.
• During the unpacking process care should be taken not to damage the FloormapX system or
cables.
• Check the contents of the FloormapX system against the packing list supplied and any missing
items are to be reported immediately.
• The package and contents of the FloormapX system should be checked for signs of damage
during transport and any problems reported immediately.
• Eddyfi accepts no responsibility for damage or injury caused during the unpacking of the
system supplied.
Packing for transportation
Before packing the FloormapX system into the transit cases ensure:
•
Each component of the system is clean and dry.
•
Components are packed correctly in the designated transit cases provided to ensure safe and
code compliant transit.
•
Ensure the scanning head magnets are in the ‘off’ position to ensure the magnetic field is