Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 89 / 106

SIMS PRO
89
Rectangular Patch Plate
To add a rectangular patch plate:
1. Click Rectangle on the repair ribbon.
2. Click, hold, and drag to draw the patch.
3. Set the required properties for the rectangular patch plate.
Tombstone Patch Plate
To add a tombstone patch plate:
1. Click Tombstone on the repair ribbon.
2. Click, hold, and drag to draw the patch.
3. Set the required properties for the tombstone patch plate.
Circular Patch Plate
To add a circular patch plate:
1. Click Circular on the repair ribbon.
2. Click, hold, and drag to draw the patch.
3. Set the required properties for the circular patch.
Patch Reference Position
The position of a patch plate is determined by measuring from the plate reference position that the
patch is located on to the patch reference position. The measurement reference for a patch can be
set to be either the patch center or the top left corner and is set in the repair ribbon. This option
applies to all patch plates and an orange dot on the patch plate indicates the location of this
reference.
Figure 119: Patch plate reference position at center
Figure 120: Patch plate reference position at top left
Patch Plate List
This list provides information related to each patch plate added to the layout. To open click Patch
Plate List on the repair ribbon. The patch plate list tool window opens to the right of the layout
window but can be dragged and docked as required. To select and view a patch plate from the list
double click on the row. The layout view zooms to that patch plate and the properties for it are shown.
Figure 121: Patch plate list tool window