Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 11 / 106

General Precautions and Conventions
11
1. General Precautions and Conventions
1.1 General Precautions
The following safety precautions must always be observed when using the Floormap®X system.
Please ensure that you review them before turning on the system:
• Keep this document in a safe place for future reference.
• Carefully follow the installation and operation procedures detailed herein.
• Observe all warnings, notes and instructions as marked on the packaging, the scanner, and
detailed in the user manual.
• FloormapX system should only be used by trained operators.
• When transporting FloormapX, it is your responsibility to follow all safety precautions as
dictated by the relevant local governing bodies.
• The equipment must not be used for purposes other than those intended. Eddyfi assumes no
responsibility for any damage resulting from such improper usage.
• If you use the system in a manner that deviates from the one specified by Eddyfi, the
protection provided on the equipment may be rendered null and void.
•
Do not use substitute parts or perform unauthorized modifications to the system.
• Service instructions, when applicable, are intended for trained service personnel only.
• Ensure by regular checks that the working site, equipment, and environments are kept in a
clean and clearly arranged state.
•
Rules and regulations regarding the prevention of accidents that apply to the working site
should be observed.
• If the system does not operate normally, please contact Eddyfi for assistance.
•
Do not leave the FloormapX system unattended when not in use.
1.2 Safety Precautions
Observe the following safety precautions rigorously when using FloormapX.
WARNING
Pinch Hazards & Powerful Magnets
The FloormapX system utilizes powerful magnets and as such presents an inherent pinch/crush
hazard. Care must always be taken when handling and using the FloormapX system. It is important
to identify in which state the FloormapX magnets are by referring to the magnet position indicators.
Figure 1: System magnet position indicators
• FloormapX magnets
ON (a non-zero magnet position indicator)
. Here the FloormapX
does
impart magnetism into the inspection surface and so is powerfully attracted to the inspection
surface or any other ferrous surface or object.