Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 45 / 106

SIMS GO
45
Create
The create button allows a new inspection to be setup by entering information into inspection details,
asset details and threshold areas.
In the inspection details area, the inspection company, operator, location, asset ID and client
information is entered. Inspection date will be assigned to the current date by default and can be
edited. If any of the inspection details are empty the inspection cannot be created. This information
will be included in the report automatically so full operator name should be used.
Figure 32: Create inspection
In the asset details area, all the physical parameters of the inspections are entered, like the tank’s
diameter, number of annular plates, bottom plate thickness, annular plate thickness, coating
thickness and scan overlap values. These values assist you during an inspection. For example, if the
annular plate thickness does not match the reference plate thickness, it prevents you from inspecting
that plate, thus ensuring the correct calibration is used.
The correct tank diameter value must be entered to correctly create the annular plates. The tank
diameter calculator tool can be used to compute the tank diameter, providing the tank consists of
identical size annular plates.
Figure 33: Tank diameter calculator
The thresholds area allows setting EPL values for default display purposes in the scans as well as for
reporting purposes. Thresholds are set to 20% by default and can be edited in the plate view, scan
and Freescan pages through a dedicated threshold menu.
Load
A list is displayed of all created inspections which are available to load and contains details relating
to the asset ID, client name and inspection date for each inspection. These details can be used to sort
the list of inspections. At the bottom of the menu the user can choose to delete, load an inspection,
or cancel out of the menu.