Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 88 / 106

SIMS PRO
88
2. Click, hold, and drag to draw the rectangle.
3. Set the required properties for the rectangle.
Draw Circle
To draw a circle:
1. Click Draw Circle on the design ribbon.
2. Click, hold, and drag to draw the circle.
3. Set the required properties for the circle.
Draw Line
To draw a line:
1. Click Draw Line on the design ribbon.
2. Click on the layout to position the start of the line.
3. Click on the layout to position the end of the line.
4. Set the required properties for the line.
Draw Freeform
To draw a freeform:
1. Click Draw Freeform on the design ribbon.
2. Click on the layout to start drawing the freeform.
3. Move the cursor to the end of the line then click again. Repeat until the freeform outline is drawn.
4. Close the freeform by double clicking or return the cursor to the red square at the start position.
5. Set the required properties for the freeform.
Add Text
To draw a text box:
1. Click Draw Text on the design ribbon.
2. Click, hold, and drag to draw the text box.
3. Set the required properties for the text box.
4. Edit the text by double clicking in the text box.
5.8 Repair Ribbon
The repair ribbon allows tank repair operations, such as adding patch plates and generating a list of
patch plates with positional information required to repair the tank floor.
Figure 118: Repair ribbon
Max Patch Plate Size
Before adding any patch plates to the layout ensure the maximum patch plate size has been set. This
ensures any added patch plates fit through the tank manway. To set the max patch plate size:
1. Click on the white background of the layout view.
2. In the properties set the Width and Length for the max patch plate size.