10
9
8
7
6
5
4
3
2
1
*
Used for alternative connection methods, described in detail in the C-DiGit
Blot Scanner User Guide on the Resource CD.
Unpack C-DiGit® Blot Scanner
Place the C-DiGit Blot Scanner
away from heat sources (furnaces, windows,
etc.) and out of direct sunlight.
Place C-DiGit Blot Scanner in Lab
Install Image Studio
™
Software
Windows® 7, 8, 8.1
, or 10
:
Important:
You must be logged in to Windows using an Administrator
account. If necessary, log out and back in using an Administrator account.
1.
Place installation CD into drive.
2.
If installation does not start immediately, browse to the CD and open
Win_Image Studio Digits_5.x.x.exe.
3.
Click
Next
and follow the instructions in the Setup Wizard.
NOTE: If you are using Windows 10, a separate driver must be installed to
connect your C-DiGit Blot Scanner to Image Studio Software via USB.
Learn more at licor.com/c-digit-driver
Mac OS X 10.9
,
10.10
, 10.11, or 10.12
:
1. Place installation CD into drive.
2. If installation does not start immediately,
browse the desktop and double-click on
MacImageStudioDigits_5.x.x.dmg
3. Click
Agree
to accept the license agreement.
4. To install, drag the Image Studio icon onto
the Applications icon (right).
LAN
USB
Amphenol
12VDC 1A
Remove the yellow warning label on the C-DiGit Blot Scanner back panel.
Remove Warning Label
N. America, Japan
United Kingdom
Australia
Europe
PUSH
LOCK
OPEN
Turn clockwise
to lock
Push button and
turn counterclockwise
to release
The power supply has interchangeable AC plugs for use in North America and
Japan, Australia, Europe, and the United Kingdom. Install the appropriate plug
on the power supply as shown.
Install Power Supply Plug
The power supply has the
North America/Japan plug
pre-installed.
PUSH
LOCK
OPE
N
AC Power
C-DiGit Blot Scanner
Computer
USB Connection
C-DiGit
USB Connection
C-DiGit
Power Connection
BS
U
12VDC
1A
Connect the larger of the two connectors on the USB cable to your computer,
and the smaller end to the C-DiGit Blot Scanner back panel at the connector la-
beled ‘USB’. Connect the power supply plug to the jack on the rear panel la-
beled ‘12VDC 1A’.
Connect USB Cable and Power
Power the C-DiGit Blot Scanner on with the power switch on the back panel.
The blue power light on the instrument front panel (below) illuminates when
the instrument is powered on.
Turn on C-DiGit Blot Scanner
When the C-DiGit Scanner is powered on and connected
to the computer f
or the fi
rst time, drivers are automati-
cally installed on the computer.
Allow up to 5 minutes
for the drivers to install before starting the Image
Studio Software in Step 9 below
.
NOTE: You may have
to dismiss any ‘Found New Hardware’ messages
.
Wait While USB Drivers Install
Double-click the Image Studio icon on the desktop to start
the Image Studio Software.
Start Image Studio Software
PC:
Click
Create New
. Navigate to where the folder will reside and name
the folder. Click
Save
.
Create New Work Area Folder
The Work Area is simply a folder on the hard drive or network where
all of the images, analyses, and settings are stored.
Mac:
Click
OK
to use the default work area, or click
Create New
. Name the
folder and navigate to where the folder will reside. Click
Save
.
Power Supply
and Plugs
Ethernet
Cable
*
USB
Cable
C-DiGit
Target
Image Studio
™
and Resource
CDs
