Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 55 / 106

SIMS GO
55
NOTE
Every plate that gets created from then on is associated to this calibration file.
IMPORTANT
When steps are performed in the incorrect sequence, or the plate is not turned, or scans
performed in the wrong direction then a failed calibration message is displayed at the end.
Failed calibration cannot be saved.
Please refer to section 3.3 FloormapX calibration preparation of this user manual for important
preparation information and inspection considerations.
Load Calibration
The load calibration menu lists all the calibrations associated with that inspection.
Figure 59: Load calibration
The list can be sorted by column values including name, date, thickness, coating, bridge height or
bridge strength. The used checkbox on the right-hand-side indicates if that calibration has been used
to scan a plate in the current inspection. The buttons allow for deleting a selected calibration, loading,
or cancelling out of the load calibration list.
NOTE
Used calibrations cannot be deleted.
Import Calibration
Calibrations from other inspections can be imported into the current inspection using the import
calibration menu.
Figure 60: Importing calibration from another inspection
The import calibration menu lists all the inspections on the system, together with a list of calibrations
associated per inspection. Once a calibration has been imported, the imported check box is toggled
on. Once imported into the current inspection the calibration name appears in the load calibration
menu.
NOTE
A calibration cannot be imported if the current inspection contains a calibration with the
same name.