Eddyfi Technologies Floormap X, Руководство пользователя

Страница: 26 / 106

FloormapX System Overview
26
Laser guide Turns the laser line on and off.
The laser line is simulated in SIMS GO software to help
location scan indications on the tank floor.
SMARTmagnet ™ Turns the powerful rare earth permanent magnets on or
off. When switched off it provides safer storage, shipping,
and manipulation during inspection.
Thumb button(s) Either button interacts with software as an ‘ accept ’
button to reduce touch screen interaction and increase
inspection efficiency and ease of use.
Motion throttle Pulling the lever controls speed of the scanner during the
inspection. The maximum speed is set in SIMS GO data
acquisition software.
Steering Turn the steering knob to alter the steering angle of the
front wheels. The SIMS GO displays the steering angle.
Press down the steering knob to return to a straight line.
Tablet
The FloormapX tablet is a quick release, detachable module that is secured in the docking station of
the mainframe and contains the SIMS GO data acquisition software. On the right-hand side of the
tablet is the scanner connector and on the left-hand side is a door covering various connectors.
IMPORTANT
During an inspection, the left side tablet door must be closed.
The tablet product and serial number label is located at the rear of the unit behind the stand and is
only visible when the tablet is not docked to the system and the stand is opened.
Figure 12: Tablet product and serial label
The front panel of the FloormapX tablet has hard buttons that can be used to interact with the SIMS
GO software to simplify operation and increase efficiency during an inspection. The location of each
button and actions are provided below.
Figure 13: FloormapX tablet overview