Power Xpert C445 Global Motor Management Relay
xii
Power Xpert C445 Global Motor Management Relay
MN042003EN—January 2019
www.eaton.com
Safety
Definitions and Symbols
WARNING
This symbol indicates high voltage. It calls your attention
to items or operations that could be dangerous to you
and other persons operating this equipment. Read the
message and follow the instructions carefully.
This symbol is the “Safety Alert Symbol.” It occurs with
either of two signal words: CAUTION or WARNING, as
described below.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, can result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, can result in minor to moderate injury, or serious
damage to the product. The situation described in the
CAUTION may, if not avoided, lead to serious results.
Important safety measures are described in CAUTION (as
well as WARNING).
Hazardous High Voltage
WARNING
Motor control equipment and electronic controllers are
connected to hazardous line voltages. When servicing
drives and electronic controllers, there may be exposed
components with housings or protrusions at or above
line potential. Extreme care should be taken to protect
against shock.
Stand on an insulating pad and make it a habit to use only
one hand when checking components. Always work with
another person in case an emergency occurs. Disconnect
power before checking controllers or performing
maintenance. Be sure equipment is properly grounded. Wear
safety glasses whenever working on electronic controllers or
rotating machinery.
Warnings and Cautions
This manual contains clearly marked cautions and warnings
which are intended for your personal safety and to avoid any
unintentional damage to the product or connected
appliances.
Please read the information included in cautions and
warnings carefully.
WARNING
The C445 may reset at any time enabling a motor start.
When faulted (FAULT LED is ON) the READY LED will
flash when an auto reset is pending.
CAUTION
Record all passwords in a safe location. Once a password has
been set it cannot be displayed. If a password is forgotten
the only method of resetting the password(s) is a factory
reset.
CAUTION
In the Auto Reset mode, caution must be exercised to assure
that any restart occurs in a safe manner. Auto Reset mode
should not be used in environments where excessive restart
attempts may cause component damage and/or create
unsafe conditions.
CAUTION
The motor, the wiring diameter and the switching device(s)
must be suitable for the selected Trip Class.
CAUTION
The current-dependent protective device must be selected
so that not only is the motor current monitored but the
blocked motor is switched OFF within the temperature rise
time.