![background image](http://html1.mh-extra.com/html/eaton/elcm-series/elcm-series_operation-manual_4035918331.webp)
6 . P o w e r a n d Ad a p t e r s U n i ts
M N 0 5 0 0 3 0 0 6 E F o r m o r e i n f o r m a t i o n v i s i t :
w w w. e a t o n . c o m
6-3
ELC-PS02
13.3
60
32.5
55
3
3
ELC-PS02
90
100
5
3
2
1
7
4
6
3
Unit: mm
1. Power LED indicator
5. I/O terminal label
2. Input/Output terminal (fixed terminal)
6. Nameplate
3. DIN rail clip
7. Direct Mounting holes (retractable)
4. DIN rail mounting slot (35mm)
6.1.1.3 Installation and Wiring
Installation of the DIN rail
y
The ELC can be secured to a cabinet by using the DIN rail that is 35mm high with a
depth of 7.5mm.When mounting the ELC on the DIN rail, be sure to use the end bracket
to stop any side-to-side motion of the ELC, thus to reduce the chance of the wires being
pulled loose. At the bottom of the ELC is a small retaining clip. To secure the ELC to the
DIN rail, place it onto the rail and gently push up the clip.
y
When installing the ELC, make sure that it is installed in an enclosure with sufficient
space to its surroundings so as to allow heat dissipation. As shown on the below.
Direct Mounting:
Please use M4 screw according to the dimension of the product.
Содержание ELCM Series
Страница 1: ......
Страница 107: ...ELC Operation Manual For more information visit www eaton com MN05003006E 2 20 MEMO...