![background image](http://html1.mh-extra.com/html/eaton/elcm-series/elcm-series_operation-manual_4035918129.webp)
E L C O p e r a t i o n M a n u a l
F o r m o r e i nf o r m a t i o n v i sit :
w w w. e a t o n . c o m
MN05003006E
1-22
ELC-AN04ANNN
EXPLANATION
bit
CR
No
Param.
Comm.
Add.
Latched
Register Name
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Reserved CH2
CH1
#33 H’4053 O R/W
Reset to factory
default settings and
inhibit modifying Gain
and Offset values
Factory setting H0000
Example for CH1:
1. When b0=0, user can set OFFSET and GAIN values
for CH1 (CR#18, CR#24). When b0=1, inhibit the
user from modifying OFFSET and GAIN values for
CH1.
2. b1=0 (factory setting, latched), b1=1 (not latched).
When b2 is set to 1, all settings will reset to factory
default settings.
#34 H’4054 O R System Version
Software version in hexadecimal. For example: H’010A
represents 1.0A.
#35~#48 System
use
O means latched. X means not latched. (available when using RS-485 communication, not available
when connected to MPU)
R means can read data by using FROM command or RS-485.
W means can write data by using TO command or RS-485.
LSB (Least Significant Bit): 1. Voltage output: 1
LSB
=10V/4,000=2.5mV.
2. Current output: 1
LSB
=20mA/4,000=5
μ
A.
Description of CR values
C R # 0 :
Module Type
1. ELC-AN02NANN module code = H’0049
2.
Read the module code in the program to verify the correct extension module.
C R # 1 :
Configuration Word
CR#1 is used to configure the two analog output channels. Each channel has four modes
that can be set individually. For example: setting CH1 to mode 2 (b2~b0=010), CH2 to mode
1(b5~b3=001). The factory setting of CR#1 is H0000.
C R # 1 0 , 11 :
The output values at CH1 ~ CH2
The decimal range for the analog outputs is: K0 ~ K4,000. Default = K0. Unit: LSB.
C R # 2 2 , 2 3 :
Adjusted OFFSET value of CH1 ~ CH2
1. The adjusted OFFSEST value for CH1 ~ CH2, representing the analog output voltage or
current when the digital output value is 0. Default = K0. Unit: LSB. Range: -2,000 ~
+2,000.
2. The adjustable range of voltage: -5V ~ +5V (-2,000
LSB
~ +2,000
LSB
).
3. The adjustable range of current: -10mA ~ +10mA (-2,000
LSB
~ +2,000
LSB
).
Содержание ELCM Series
Страница 1: ......
Страница 107: ...ELC Operation Manual For more information visit www eaton com MN05003006E 2 20 MEMO...