Eaton ELCM Series, Руководство по эксплуатации

Страница: 163 / 336

E L C O p e r a t i o n M a n u a l
F o r m o r e i nf o r m a t i o n v i sit :
w w w. e a t o n . c o m
MN05003006E 1-56
ELC- PT04ANNN EXPLANATION
bit
CR
No
Param.
Comm.
Add.
Latched Register Name
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
#24 H’407C X R
Present temp. of
CH1(°F)
#25 H’407D X R
Present temp. of
CH2(°F)
#26 H’407E X R
Present temp. of
CH3(°F)
#27 H’407F X R
Present temp. of
CH4(°F)
Present temperature for channels CH1~CH4.
(unit: 0.1degrees F)
#30 H’4082 X R Error status
Data register stores the error status, refer to fault code
chart for details.
#31 H’4083 O R/W Comm. Address Range is 01~255 and factory setting is K1
#32 H’4084 O R/W
Communication baud
rate setting
Communication baud rate (4,800, 9,600, 19,200, 38,400,
57,600 and 115,200 bps). For ASCII mode, data format is
7 Bits, even parity, 1 stop bit (7 E 1). For RTU mode, data
format is 8 Bits, even parity, 1 stop bit (8 E 1).
b0: 4,800 bps (bit/sec)
b1: 9600 bps (bit/sec). (factory setting)
b2: 19,200 bps (bit/sec), b3: 38,400 bps (bit/sec)
b4: 57,600 bps (bit/sec), b5: 115,200 bps (bit/sec)
b6 ~ b13: Reserved
b14: switch between low byte and high byte of CRC code
(For RTU mode)
b15: RTU mode
Def. f
ERR LED
CH4 CH3 CH2 CH1
#33 H’4085 O R/W
Reset to factory
setting
Example: CH1
1. b0 Reserved
2. b1 Reserved
3. b2: Set to 1 and ELC will be reset to factory settings.
Definition of ERR LED: b12~b15=1111(factory settings)
1. b12 corresponds to CH1: when b12=1, scale exceeds
the range or external contact has no connection, ERR
LED flashes.
2. b13 corresponds to CH2: when b13=1, scale exceeds
the range or external contact has no connection, ERR
LED flashes.
3. b14 corresponds to CH3: when b14=1, scale exceeds
the range or external contact has no connection, ERR
LED flashes.
4. b15 corresponds to CH4: when b15=1, scale exceeds
the range or external contact has no connection, ERR
LED flashes.
#34 H’4086 O R System Version
Display software version in hexadecimal.
Example: H’010A = version 1.0A.
#35~#48 System used