Eaton ELCM Series, Руководство по эксплуатации

Страница: 226 / 336

3. AIAO Units
MN05003006E F or more information visit:
w w w. e a t o n . c o m
1-119
C R # 3 8 , 3 9 :
Adjusted Gain values for CH5 ~ CH6
1. Set the adjusted Gain values for CH5 ~ CH6, which represent the voltage (current)
output values corresponds to digital value 16,000.
2. Default setting = K16,000.
C R # 4 0 :
Function: Prohibited configuration changes, Default = H’0000
Description
bit0 b0=0, CH1 changing allowed; b0=1, CH1 changing prohibited
bit1 b1=0, CH2 changing allowed; b1=1, CH2 changing prohibited
bit2 b2=0, CH3 changing allowed; b2=1, CH3 changing prohibited
bit3 b3=0, CH4 changing allowed; b3=1, CH4 changing prohibited
bit4 b4=0, CH5 changing allowed; b4=1, CH5 changing prohibited
bit5 b5=0, CH6 changing allowed; b5=1, CH6 changing prohibited
bit6 ~ bit15 Reserved
Affected Parameters
CR#2 ~ CR#5 Input mode setting at CH1 ~ CH4
CR#6 ~ CR#7 Output mode setting at CH5 ~ CH6
CR#8 ~ CR#11 Sampling range of CH1 ~ CH4
CR#28 ~ CR#33 Adjusted Offset value of CH1 ~ CH6
CR#34 ~ CR#39 Adjusted Gain value of CH1 ~ CH6
CR#42 Return to default setting
CR#100 Function: Enable/Disable limit detection
CR#102~CR#107 Set value of CH1~CH6 upper bound
CR#108~CR#113 Set value of CH1~CH6 lower bound
CR#114~CR#115 Output update time of CH5~ CH6
CR#118 LV output mode setting of Ch5 ~ Ch6
C R # 4 1 :
Function: Save all configuration values. Default=H’0000
Save all the configuration values to the internal flash memory. When saving is completed,
CR#41 will be set to H’FFFF.
Set value Function
H0 No action
HFFFF Saving completed
H5678 Saving enabled.
Note: Default setting = H0. When the CR#41 value = H’5678, saving will be enabled, and
CR#41 will be set to H’FFFF when saving is complete.