3. AIAO Units
MN05003006E F or more information visit:
w w w. e a t o n . c o m
1-163
CR#
CH1 CH2 CH3 CH4
Save
Register content
Description
#124 #144 #164 #184 O R/W K
D
Derivative
constant. Default = K-29
#125 #145 #165 #185 O R/W Upper limit of I value
Upper limit of I value. Default = K0
#126 #146 #166 #186 O R/W Lower limit of I value
Lower limit of I value. Default = K0
#127 #147 #167 #187 X
R I value
Current accumulated offset value
#128 #148 #168 #188 O R/W Heating/cooling
0: Heater, 1: Cooler. Default = K0
#129 #149 #169 #189 O R/W Upper limit of output Upper limit of output. Default = K32,000
#130 #150 #170 #190 O R/W Lower limit of output Lower limit of output. Default = K0
#131 #151 #171 #191 X R Output percentage
Output percentage (Unit: 0.1%)
#132 #152 #172 #192 X R Output width (ms)
Width of control output. Unit: ms
#133 #153 #173 #193 X R Output cycle (ms)
Cycle of control output. Unit: ms
#134 #154 #174 #194 X R Output volume
Output volume
#135 #155 #175 #195 X R/W PID_RUN/STOP
0: STOP, 1: RUN. Default = K0
#136 #156 #176 #196 X R/W Auto-tuning
0: Disabled, 1: Auto-tuning. Default = K0
Symbols:
O: When CR#41 is set to H’5678, the configuration values will be saved.
X: configuration values will not be saved.
R: able to read data using FROM instructions.
W: able to write data using TO instructions.
Explanation on CR
C R # 0 :
Module Type
1. ELCM-TC04ANNN module code = H’0083.
2. Read the module code in the program to verify the correct extension module
C R # 1 :
Firmware version
Display the current firmware version in hex, e.g. version V1.00 is indicated as H’0100.
C R # 2 , 3 , 4 , 5 :
CH1 ~ CH4 input mode configuration
Set the mode for the channels in the TC04ANNN input module. There are 9 modes for each
channel which can be set up separately.
When configuring CH1 to mode 1 (H’0001) CR#2 must be set to H’0001. The default setting
= H’0000. CH1 example:
Mode 0 (H’0000): J-type (-100°C ~1,150°C).
Mode 1 (H’0001): K-type (-100°C ~ 1,350°C).
Mode 2 (H’0002): R-type (0°C ~ 1,750°C).
Mode 3 (H’0003): S-type (0°C ~ 1,750°C).
Mode 4 (H’0004): T-type (-150°C ~ 390°C).
Содержание ELCM Series
Страница 1: ......
Страница 107: ...ELC Operation Manual For more information visit www eaton com MN05003006E 2 20 MEMO...