Installation Instructions
1 |
P a g e
V 1 . 1 P u b l i s h e d o n 1 1 2 0 1 7
REMOTE CONTROL GLOBE LED KIT
SKU# 121245
Remote Rated Voltage: 2 X 1.5VDC
Globe Rated Voltage: 220-240V AC, 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and
follow all instructions carefully before using the product. Please keep instructions for future reference.
Important information before Installation
•
This product is covered by a 3 year warranty. The warranty is from date of purchase, not the date of
installation.
•
This globe is not suitable for use with solid-state or phase type dimmer switches. Warranty will be void if
the fitting is used on the same circuit which has a dimmer switch.
•
For outdoor use, please use in a minimum IP44 fixture.
Packing list
SKU#121245: 121246 globe x 2; 121247 remote x 1
Installation instruction
Install The Battery
•
Slide and open the battery cover to access to the battery
compartment.
•
Install 2 x 1.5VDC AAA battery in the compartment. Please make
sure the polarity of the battery is correct.
NOTE: This product is only compatible with Lucci Comfort globes.
Remote Control Buttons
:ALL ON button: Press it to turn ON all globes. Press and hold to pair all
globes with the remote. Please refer to “pairing remote with globe” section.
:ALL OFF button: Press it to turn OFF all globes. Press and hold to clear all
paired codes. Please refer to “pairing remote with globe” section.
:WARM WHITE button: press it to set the globe to a 3000K colour
temperature.
:DAYLIGHT button: Press it to set the globe to a 5000K colour temperature.
:COOL WHITE button: Press it to set the globe to a 4000K colour
temperature.
:NIGHT LIGHT button: Press it to set the globe to a night light mode.
:COLOUR TEMPERATURE DECREASE button: Press it repeatedly to
gradually decrease the colour temperature (Minimum 3000K).
