![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779002.webp)
For more information visit: www.eaton.com
IB02602004E
Instructional Literature
Page
2
Effective: May 2008
Instructions for the FP-6000 Protective Relay
1 Product Overview
1.1 General Description
The Eaton FP-6000 Protective Relay is a multifunction panel
mounted, microprocessor-based relay, designed for both ANSI
and IEC applications (Figure 1). It is a self-contained device which
operates from either ac or dc control power and provides true
rms sensing of each phase and ground current. Only one relay is
required per 3-phase circuit. Current, voltage and operator-
selectable protective functions are integral to each device.The
FP-6000 is designed to protect the mains, ties or feeders at any
voltage level. It is primarily applied on medium voltage
distribution circuits up to 69 kV. The FP-6000 monitors several
primary and derived electrical parameters of the system.
1.2 Audience
The audience for this document is the Specifying or System
Engineer, the operating personnel and the troubleshooting
personnel. This document will guide the system user to apply
and program the FP-6000. The document will provide operating
information, enabling the operating user to start and trip the
breaker associated with the FP-6000. The operator can refer to
this publication regarding any operation of the FP-6000. This
document will also provide information to program the FP-6000
and use the troubleshooting features to collect and analyze
historical, trending and oscillographic data.
1.3 Safety and Caution Notices/Disclaimers
This technical document is intended to cover most aspects
associated with the installation, application, operation and
maintenance of the Eaton FP-6000 Protective Relay. It is provided
as a guide for authorized and qualified personnel only in the
selection and application of the FP-6000 Protective Relay. Please
refer to the specific
WARNINGS
and
CAUTIONS
that follow
before proceeding. If further information is required by the
purchaser regarding a particular installation, application or
maintenance activity, a Eaton representative should be
contacted. Technical Support is available 24 hours a day by
phoning Eaton Power Management Applications Support at
1-800-809-2772, Option 1 / Option 1.
See also 12.3, Getting help from Eaton.
1.3.1 WARRANTY AND LIABILITY INFORMATION
CAUTION
ALL SAFETY CODES, SAFETY STANDARDS AND/OR REGULATIONS
MUST BE STRICTLY OBSERVED IN THE INSTALLATION, OPERATION
AND MAINTENANCE OF THIS DEVICE.
WARNING
THE WARNINGS AND CAUTIONS INCLUDED AS PART OF THE PRO-
CEDURAL STEPS IN THIS DOCUMENT ARE FOR PERSONNEL
SAFETY AND PROTECTION OF EQUIPMENT FROM DAMAGE. AN
EXAMPLE OF A TYPICAL WARNING LABEL HEADING IS SHOWN
ABOVE TO FAMILIARIZE PERSONNEL WITH THE STYLE OF PRESEN-
TATION. THIS WILL HELP TO ENSURE THAT PERSONNEL ARE
ALERT TO WARNINGS, WHICH MAY APPEAR THROUGHOUT THE
DOCUMENT. IN ADDITION, CAUTIONS ARE ALL UPPERCASE AND
BOLDFACE.
CAUTION
COMPLETELY READ AND UNDERSTAND THE MATERIAL PRE-
SENTED IN THIS DOCUMENT BEFORE ATTEMPTING INSTALLATION,
OPERATION OR APPLICATION OF THE EQUIPMENT. IN ADDITION,
ONLY QUALIFIED PERSONS SHOULD BE PERMITTED TO PERFORM
ANY WORK ASSOCIATED WITH THE EQUIPMENT. ANY WIRING
INSTRUCTIONS PRESENTED IN THIS DOCUMENT MUST BE FOL-
LOWED PRECISELY. FAILURE TO DO SO COULD CAUSE PERMA-
NENT EQUIPMENT DAMAGE
WARNING
THE LOSS OF CONTROL VOLTAGE WILL CAUSE THE FP-6000 TO BE
INOPERATIVE. IF AC CONTROL VOLTAGE IS USED, AN APPROPRI-
ATE RELIABLE POWER SOURCE/SCHEME SHOULD BE SELECTED
(POSSIBLY A UPS SYSTEM) TO SUPPLY POWER TO THE RELAY.