![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779198.webp)
Instructional Literature
Page
198
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
Table 68. Clear Active Alarm - Event Operate Cause
.
Table 69. Clear Active Alarm - Event BreakerCause.
CONDITION
CLEAR BY
TR IOC 50P
Conditions must be cleared externally,
away from the FP-6000 unit.
TR IOC 50X
TR IOC 50R
TR TOC 51P
TR TOC 51X
TR TOC 51R
TR OV 59M
TR UV 27M
TR OV 59A
TR OV 59N
TR POWER 32
TR UV 27A
TR I Unbal 46
TR V Unbal 47
TR UF 81
TR OF 81
TR BF
TR PF 55A
TR PF 55D
TR Zone IntLock P
TR Zone InterLock G
Watt Power
VA Power
VAR Power
Watt Demand
VA Demand
VAR Demand
Current Demand
I THD
V THD
Bkr Operations
Press the Reset pushbutton on the FP-6000.
Scroll to the History Log and press Enter.
Scroll to Bkr History and press the Enter
pushbutton two times.
Accum Current
Press the Reset pushbutton on the FP-6000.
Scroll to the History Log and press Enter.
Scroll to Bkr History and press the Enter
pushbutton two times.
LOP ALARM
Condition must be cleared externally, away
from the FP-6000 unit.
CONDITION
CLEAR BY
Bkr Lockout
Press the Reset button, scroll to Bkr Lockout and press the
Enter button two times.
Slow Bkr Time
Press the Reset button, scroll to Slow BkrAlm and press the
Enter button two times.
Bkr State Alm
The Breaker State Alarm is based on 52A and 52B events.
Conditions must be cleared externally, away from the
FP-6000 unit.
Trip1 Mntr Alm
The Trip1 Monitor Alarm can not be cleared, only disabled.
To disable the alarm press the Setting button, scroll to Out-
put Config, press Enter. Scroll to Output Trip1, press Enter.
Scroll to OFF and press Enter.
Trip2 Mntr Alm
The Trip2 Monitor Alarm can not be cleared, only disabled.
To disable the alarm press the Setting button, scroll to Out-
put Config, press Enter. Scroll to Output Trip2, press Enter.
Scroll to OFF and press Enter.
AR Lockout
Press the Reset button, scroll to AR Lockout and press the
Enter button two times.