![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779200.webp)
Instructional Literature
Page
200
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
From the main page of the trip log any one record of an event can
be chosen. Simply move the arrow using the arrow pushbuttons
to the event you would like more detail on and then press Enter.
Each individual record has many lines of information. Table 71
shows what information is included in every line. Some lines
contain another level of information that can be accessed by
using the arrow keys to select the line and then pressing Enter.
All such lines in the trip log are marked with asterisks in Table 71.
Table 71. Trip Log Record Line-by-Line.
* Indicates information available by selecting the line and pressing Enter.
LINE DISPLAY
DESCRIPTION
1
Trip #
Unique number assigned to every trip event sequentially. The numbers rolls over after 65,535.
2
Time
HH:MM:SS:mmm
The time of the event displayed in hours, minutes, seconds, and milliseconds. The hours will be in 24-hour mode or 12-hour mode with an
AM – PM disignation according to the programmed setpoint.
3
Event #
The event number is a unique number given for each log in the event log. The event number is a reference to the event log of the trip relay
activating. This is useful to synchronize the event log to the trip log.
4
Cause
The cause of the trip relay activation is given and is detailed in Table 67.
5
Flt Type
Fault type details the phases or ground channel that has caused the fault. Fault type will only have value for current TOC, IOC protective
functions, and the main under and overvoltage protective functions.
6
Set Seq Num
The setting sequence number is a unique number given when new setpoints are saved. It is a way of identifying which setpoints were in
use at the time of the trip.
7
WaveCap Index
The waveform capture index is a unique number that is assigned to every waveform capture operation. A waveform is automatically
captured every time the Trip1 relay activates, and can be programmed to capture a waveform when the Trip2 relay activates.
8
ActiveSetGrp
Active Setting Group in effect when the trip occurred.
9
Trip Statu
Trip Status – shows if the FP-6000 has fully processed the trip data.
10
TOCTime ms
The Time Over Current trip time, that is the time from the TOC pickup to the trip in milliseconds.
11
Input Status *
A group of status flags detailing the state of the discrete inputs at the time of the trip.
12
Output Status *
A group of status flags detailing the state of the discrete outputs at the time of the trip.
13
IOC Pickup Status *
A group of status flags detailing the state of all the Instantaneous Over Current protective function pickups at the time of the trip.
14
V PH Pickup Status *
A group of status flags detailing the state of all the phase voltage protective function pickups at the time of the trip.
15
Volt Pickup Status
A group of status flags detailing the state of all the voltage protective function pickups at the time of the trip.
16
TOC Pickup Status *
A group of status flags detailing the state of all the Time Over Current protective function pickups at the time of the trip.
17
Misc. Pickup Status * A group of status flags detailing miscellaneous protective function pickups at the time of the trip.
18
OC Trip Status *
A group of status flags detailing Over Current protective function operations at the time of the trip.
19
Misc. Trip Status *
A group of status flags detailing miscellaneous protective function operations at the time of the trip.
20
Volt Trip Status *
A group of status flags detailing voltage protective function operations at the time of the trip.
21
Output Gate Status * A group of status flags detailing the state of the logic output gate driving each output relay as well as the state of auxiliary LED at the time
of the trip.
22
Logic Block Status *
A group of status flags detailing the logical state of the programmable blocking gates output at the time of the trip.
23
Logic Gate Status *
A group of status flags detailing the logical state of the programmable logic gates and timing gates at the time of the trip.
24
SYSALM Pickup *
A group of status flags detailing the system alarm pickups at the time of the trip.
25
SYSALM Timeout *
A group of status flags detailing the system alarm time-outs at the time of the trip.
26
Breaker Status *
A group of status flags detailing the breaker state and associated alarms at the time of the trip.
27
Direction Status *
A group of status detailing the state of all the direction units at the time of the trip.
28
Sync Control *
A group of status detailing the state of sync-check related flags and cold load pickups at the time of the trip.
29
Ogx Input Settings *
Shows the program settings of the inputs on the output logic gate that has driven either Trip 1 or Trip 2 to the active state at the time of the
trip. This can identify which trip relay has activated.
30
Ogx Input State *
Shows the state of each logic input on the output logic gate that has driven either Trip 1 or Trip 2 to the active state.
31
Trip Test Status *
A group of status flags that shows if any output relay or zone interlock output has been forced to the active state through the test function.
32
Autoreclose Control
A group of status flags detailing the autoreclose logic operations at the time of the trip.
33
RTD Pickup Status
A group of status flags detailing the thermal protection pickups at the time of the trip.
34
RTD Alarm1 Status
A group of status flags detailing the thermal alarm 1 pickups at the time of the trip.
35
RTD Alarm2 Status
A group of status flags detailing the thermal alarm 2 pickups at the time of the trip.
36
RTD Trip Status
A group of status flags detailing the thermal protection trips at the time of the trip.
37
RTD Alarm1 Timeout
A group of status flags detailing the thermal alarm 1 trips at the time of the trip.
38
RTD Alarm2 Timeout
A group of status flags detailing the thermal alarm 2 trips at the time of the trip.
39
Var Misc Pickup
A group of status flags detailing the Var protection pickups at the time of the trip.
40
Var Misc Trip Status
A group of status flags detailing the Var protection trips at the time of the trip.
41
RMS Values
Show the RMS values of currents and voltages, as well as the frequency, current unbalance, and voltage unbalance at the time of the trip.
42
V&I Phasors
Shows the fundamental voltage and current phasors with magnitude and relative phase angle at the time of the trip.
43
RTD Temperature
Shows the RTD temperatures at the time of the trip.