![background image](http://html1.mh-extra.com/html/nx/nxp2-rl-sp/nxp2-rl-sp_installation-instructions_1721360001.webp)
3483B 031321
72-00669
™
1
NX Lighting Control Panel Relays
INSTALLATION INSTRUCTIONS
PRECAUTIONS
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
• CAUTION - RISK OF ELECTRICAL SHOCK
. To prevent electrical shock, turn off power at the circuit breaker before installing
or servicing unit. Never wire energized electrical components.
• NOTICE:
For installation by a licensed electrician in accordance with national and/or local Electrical Codes and the
following instructions.
• CAUTION: USE COPPER CONDUCTOR ONLY
.
• CAUTION: This equipment provides more than one power supply output source. To reduce the risk of electric shock
disconnect both normal and emergency sources within this unit before servicing any equipment connected to this unit.
• Be sure to read and understand all instructions before installing or servicing unit
• For Indoor use only. Do not use outdoors.
• Do not install near gas or electric heaters.
• The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
• Confirm that device ratings are suitable for application prior to installation.
• Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized
personnel.
• Use only approved materials and components (i.e. twist on connectors, electrical box, etc.) as appropriate for installation.
• NOTICE:
Do not install if product appears to be damaged.
• If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may
be impaired.
• Do not use this equipment for other than intended use.
SAVE THESE INSTRUCTIONS!
INSTALLATION OVERVIEW
The installation instructions contained in this document are provided as a guide for proper and reliable installation and connection of
NX Lighting Control Panel V2 Single Pole (p/n NXP2-RL-SP) and Double Pole Relays (p/n NXP2-RL-DP).
These instructions include information as follows:
Precautions
Description
Installing Individual Relays
Relay Specifications
701 Millennium Blvd. | Greenville, SC 29607 | (864) 678-1000 | hubbellcontrolsolutions.com
Copyright © 2021 Hubbell Control Solutions, a division of Hubbell Lighting, Inc. All rights reserved. All product and company names, logos and product
identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any
affiliation with or endorsement by such respective owners.