![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779186.webp)
Instructional Literature
Page
186
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
PowerNet DDE Server
DDE (Dynamic Data Exchange) is a communication protocol supported
within the Microsoft Windows operating environment that allows
cooperating Windows applications to share information. DDE
implements a client/server relationship between concurrently running
applications.
PowerNet DDE Server is the PowerNet Software application that
acts as a DDE server to other DDE clients. PowerNet DDE Server
accepts requests from DDE clients, then relays the requests to
the PowerNet DeviceServer (or DeviceServers), using PowerNet
Protocol. When the PowerNet DDE Server receives device data
from a PowerNet DeviceServer, it uses the DDE link to send
device data back to the DDE clients.
PowerNet Bill
PowerNet Bill is a billing software package that generates bills for
energy consumers based on energy provider metrics (such as
rate schedules, rate periods and seasons) and energy user profile
information (such as group charges, individual charges, and
individual billing formulas).
PowerNet Trend
PowerNet Trend is a PowerNet Software application that
graphically displays energy data collected by the PowerNet
DeviceServer. PowerNet Trend plots energy utilization (by
kilowatt-hours) or demand (by kilowatts) over time. PowerNet
Trend can plot energy profiles of loads or combinations of loads,
which you can then save for viewing at a later time.
PowerNet Modbus Tools
PowerNet Modbus Tools is a PowerNet Software application that
is used to define Modbus register mapping in PowerNet
DeviceServers. A PowerNet DeviceServer serves as an interface
between a Modbus Master and IMPACC devices, and supports a
subset of the standard Modbus serial protocol communication.
NetPower Monitor
PowerNet Monitor is a PowerNet Software application used to
monitor and control devices on PowerNet DeviceServers. With
PowerNet Monitor, you can view all the detailed device
information, as well as a summary view of current and energy
information and device alarm information.
PowerNet Waveform
PowerNet Waveform is the PowerNet Software application that
allows you to command certain IMPACC devices to capture
waveform data, to upload the waveform data from devices to a
file, and to view a graphical representation of waveform data.
P
owerNet Setpoints & Trip Curve
PowerNet Setpoints & Trip Curve is a tool that allows you to view
setpoint data for each device connected to a PowerNet
DeviceServer, change setpoint data for a device, and view the trip
curve for a device.
PowerNet OPC Server
OPC (OLE Process Control) is an industry standard protocol for
communicating with multiple data sources, such as devices on a
factory floor or a database in a control room. OPC is supported
by Microsoft Windows. NetPower OPC Server acts as an interface
between the OPC protocol and the PowerNet protocol, enabling
Windows applications to receive data dynamically from IMPACC
devices and issue device commands. Windows applications act
as clients, sending and receiving data to and from the PowerNet
OPC Server using the OPC protocol.
PowerNet Event Viewer
PowerNet Event Viewer is a PowerNet software application used
to view historical information collected by PowerNet
DeviceServers, and merged into databases with PowerNet Tools.
PowerNet DDE Energy Logger
PowerNet DDE Energy Logger is the PowerNet Software
application that facilitates logging of energy usage data from
alternate sources. PowerNet DDE Energy Logger uses DDE
connectivity to gather and integrate energy data from third-party
sources into the PowerNet System. The PowerNet DDE Energy
Logger application utilizes the industry standard Dynamic Data
Exchange (DDE) protocol to exchange information with a target
DDE Server.