![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779005.webp)
IB02602004E
For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008
Page
5
Instructions for the FP-6000 Protective Relay
FP-6000 Features List
Protection Features
•
Phase overcurrent
A.
2-stage instantaneous with timers (50P-1 & 50P-2)
B.
Inverse time overcurrent (51P)
C.
Voltage restraint inverse time overcurrent (51P2)
D.
10 standard curves
E.
Reset
1.
Instantaneous
2. Time Delay
3. Calculated
•
Independent measured ground or neutral overcurrent element
A.
2-stage instantaneous with timers (50X-1 & 50X-2)
B.
Inverse time overcurrent (51X)
C.
10 standard & 3 user defined custom curves
D.
Reset
1.
Instantaneous
2. Time Delay
3. Calculated
•
Independent calculated ground or neutral overcurrent element
A.
2-stage instantaneous with timers (50R-1 & 50R-2)
B.
Inverse time overcurrent (51R)
C.
10 standard curves
D.
Reset
1. Instantaneous
2. Time Delay
3. Calculated
•
Breaker failure (50BF)
•
Phase current unbalance and sequence protection (46)
•
Phase voltage unbalance and sequence protection (47)
•
Main 3-phase under/overvoltage (27M1/59M1)
•
Power Protection (32), Var Protection(32V)
•
Under/over frequency (81U/81O)
•
Auxiliary single-phase under/overvoltage (27A1/59A1)
•
Neutral voltage (59N1)
•
Power factor (55)
•
Thermal Protection (49DT, 49MT)
•
Zone interlocking for bus protection (87B)
•
Additional elements for alarming on:
A.
Instantaneous overcurrent (50P-3, 50X-3, 50R-3)
B.
Under/overvoltage (27M-2/59M-2, 27A-2/59A-2)
C.
Power (32), Var (32V)
D.
Under/over frequency (81U-2, 810-2)
E.
Current unbalance (46-2)
F.
Voltage unbalance (47-2)
G.
Neutral voltage (59N-2)
H.
Thermal Alarm (49DA, 49MA)
Metering Features
•
Amps & amps demand
•
Volts
•
Volt-amps
•
Watts & kW demand
•
kwh, net kwh
•
Vars & kvar demand
•
Kvarh & net kvarh
•
Power factor
•
Frequency
•
Min/max recording
•
Trending (load profile over time)
•
Current & voltage THD
•
RTD
Monitoring Features
•
Trip coil
•
Breaker wear (accumulated interrupted current)
•
Oscillography (256 cycles total, up to 16 events)
•
Trip data logs (up to 16 events)
•
Sequence of events report (up to 100 events)
•
Clock (1 ms time stamping)
Control Functions
•
Remote open/close
•
Local open/close
•
Programmable I/O
•
Programmable logic gates and timers
•
Multiple setting groups (up to 4)
•
Sync-Check (25)
•
Cold load pickup
•
Autoreclose Function (79)
•
Auto Zone Coordination
Mechanical Features
•
Full drawout unit (automatic CT shorts)
•
Standard IQ Panel Cutout retrofit possible
•
Outline Size is approximately 6.5" (165.1 mm) wide 10"
(254 mm) high 7" (177.8 mm) deep
•
Weight for outer case is 5.0 lbs. (2.27kg), inner drawout
5.8 lbs.(2.63 kg)
Approximate shipping weight is 16.5 lbs. (7.48 kg)
Design Features
•
Password protected
•
Data acquisition with necessary resolution and sampling
frequency
A.
3-phase currents
B.
Ground current
C.
3-phase voltages
D.
Auxiliary voltage
E.
rms values (current and voltages)
F.
Power [real (W), reactive (VAR), apparent (VA)]
G.
Power factor (apparent and displacement)
H.
Fequency
I.
Power and current demand