![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779053.webp)
IB02602004E
For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008
Page
53
Instructions for the FP-6000 Protective Relay
4.6.3 Logs
There are three types of logs: Trip
Log, Event Log, and History Log.
•
The Trip Log provides details
for the most recent 16 trip
events.
•
The Event Log is a sequence of
event reports for the last 100
events.
•
The History Log provides a
counter for the number of
operations and/or events that
occurred on the unit.
See Section 12 for log details.
Press the
Log
pushbutton to go in
to Log Mode and to view the
FP-6000 Trip, Event, and History
Logs. The red LED in the upper left-
hand portion of the pushbutton
area will illuminate while you are
in the Log Mode. The display 13
below shows the options provided
by pressing the
Log
pushbutton.
Display 13. Log Main Menu.
4.6.3.1 Trip Log
The Trip Log stores the trip information for the last 16 trip events.
An example of the “Trip Log Display” showing two trip events is
displayed below. The #1 event will always show the latest trip
event. When the 16 trip event logs are filled, the FP-6000 will
overwrite the oldest log.
By using the
Up/Down
pushbuttons, the user can select any trip
event. Using the example above, the #1 event is an
“instantaneous overcurrent” trip on phase that happened 1/19/01.
By selecting this event with the
Up/Down
arrows and pushing
the
Enter
pushbutton, the user can view additional information
about the event. Display 14 is an example of the trip log
information.
Display 14. Trip Log #1 Example Display.
Log Main
Trip Log
Event Log
History Log
Trip Log
1 50P IOC 1/19/01
2 Relay Test 10/25/00
3 0/0/00
50P IOC 1/19/01
Display Meanings
Trip #:
Time:
Event #:
2
13:36:06.109
27
Trip #
Time of trip
Event #
Cause:
Flt Type:
Set Seq Num:
50P IOC
AG
0
Cause of trip
Fault Type
Setting Sequence Number
WaveCap Index
ActiveSetGrp:
TripStatus:
34
1
Processed
Waveform Capture Index
Active Setting Group
Trip Status
TOC Time ms
Input Status
Output Status
NA
Time Overcurrent Trip Time
Input Status
Output Status
IOC Pickup Status
Inverse Time Overcurrent
Status
Voltgage Pickup Flag
Voltage Phase Pickup Status
V Ph Pickup Status
Voltgage Pickup Flag
TOC Pickup Status
Time Overcurrent Pickup
Status
Misc. Pickup Status
Miscellaneous Pickup Status
OC Trip Status
Overcurrent Trip Status
Misc. Trip Status
Volt Trip Status
Output Gate Status
Miscellaneous Trip Status
Voltage Trip Status
Output Gate Status
Logic Block Status
Logic Gate Status
SYSALM Pickup
Logic Block Status
Logic Gate Status
System Alarm Pickup
SYSALM TimeOut
Breaker Status
Directional Units
System Alarm Timeout
Breaker Status
Directional Units
Sync Control
OGx Input Settings
OGx Input State
Sync-Check Control
Output Gate Input Settings
Output Gate Output Setting
Trip Test Status
Trip Test Status
RMS Values
RMS Values of Voltages,
Currents
V&I Phasors
Voltage & Current Phasors
Trip Test Status
AR Operation Status
Autoreclose Operation
Status
RTD Pickup Status
RTD Pickup Status
RTD Alarm1 Status
RTD Alarm1 Pickup Status
RTD Alarm2 Status
RTD Alarm2 Pickup Status
RTD Trip Status
RTD Trip Status
RTD Alarm1
Timeout
RTD Alarm1 Timeout Status
RTD Alarm2
Timeout
RTD Alarm2 Timeout Status
Var Misc Pickup
Var and Other Protections
Pickup Status
Var Misc Trip
Var and Other Protections
Trip Status