![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779225.webp)
IB02602004E
For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008
Page
225
Instructions for the FP-6000 Protective Relay
13.5 Standards Compliance
The following table shows the standards to which the FP-6000
complies and, where appropriate, the rating achieved under the
standard’s categories. Note that, in most cases, the performance
levels exceed the levels given. This table is not a maximum
performance specification, rather it shows compliance to
published numbers in the standards.
Table 72. Standards Compliance
NORTH AMERICAN STANDARDS
EUROPEAN STANDARDS
ANSI/IEEE
ANSI/IEEE C37.90-1989
Performance Standard for Relay Systems associated with electric power apparatus
ANSI C37.90.1 (1989) Surge Withstand Capability
Oscillatory Surge Wave Compliance (OSWC)
2.5 kV
Fast Transient Surge Wave Compliance (FTSWC)
4.0 kV
ANSI C37.90.2 (1995) RF radiated immunity
RF Radiation Withstand
to > 35 V/M; 27 - 1000 MHz
UL/CUL
FP-6000 UL Compliance is covered under UL File Number E154862
Catalog # FP-6000-00 5 Amp Version only, FP5100-00 1 Amp version pending
UL-1053
Ground Fault Interruption (GFI) for Protective Relaying (PR) Equipment Performance - FP-6000-00 5
Amp version only, FP-5100-00 1 Amp version pending
UL-508
Spacing of conductors, Safety, Fire
FCC
CFR 47 FCC Part 15 Subpart b Class A
EMF radiation limitation
Emissions
EN-50081-2
EN 50011 CISPR-11, Class A
Immunity EN-61000-6-2 (1999)
IEC 61000-4-2 ESD Immunity
Electrostatic discharge, 8/6 kV; Air/Contact
IEC 61000-4-3 RF Radiated Immunity
RF Radiation, 10 V/M 80-1000 MHz (1kHz 80% Amplitude Modulation)
IEC 61000-4-4 EFT/Burst Immunity
Electrical Fast Transient, 4/2 kV; CM/DM
IEC 61000-4-5 Surge Immunity
Surge, 2/1kV; CM/DM
IEC 61000-4-6 RF Conducted Immunity
RF Conductive, 10 Vo; 0.150-80 MHz
IEC 61000-4-8 Power Frequency Magnetic Field Immunity Magnetic Field, 50/60 Hz 30 A/m
IEC 61000-4-11 Voltage Variation Immunity Test
Voltage dips, 30% reduction, 0.5 periods; 60% reduction 5/50 periods.
Voltage Interruption 95% reduction 250 periods