![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779080.webp)
Instructional Literature
Page
80
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
1
This setting is only sued if the “Dropout” setting is set to “Off Delay”
Note:
The I/O Configuration Setting in the System Configuration settings menu must be set to “custom” for these set points to be configured. Otherwise the default set-
tings displayed are used. See sections 5.4.5 and 5.4.6 for details.
Table 16. Output Configuration Settings.
DISPLAY SETTING
DESCRIPTION
SETPOINT RANGE/
VALUE SELECTION
DEFAULT
SETTING
SELECTED
VALUE
REFER TO SEC. #
Output Trip1
Output Trip 1 Relay Settings
5.4.6
9.2
9.6
Monitor:
Select "Breaker Trip" coil circuit monitoring to on
or off
Off, On
ON
Function:
Select logic output function for Output Trip1
OR, AND, NOR, NAND, disable
OR
Dropout:
Select relay state after trip occurs
Latched, unlatched, off delay
Off Delay
Off Delay (c):
select delay for Trip Relay to dropout after trip
event clears
1
0 to 600 cycles
(1 cycle increments)
5
IN1:
Select logic input IN1 for Output Trip1
*See Logic Input Options Table 18
Trip AllProt
IN2:
Select logic input IN2 for Output Trip1
*See Logic Input Options Table 18
Cntrl, OpenBkr
IN3:
Select logic input IN3 for Output Trip1
*See Logic Input Options Table 18
Unused
IN4:
Select logic input IN4 for Output Trip1
*See Logic Input Options Table 18
Unused
Output Trip2
Output Trip2 Relay Settings
5.4.6
9.2
9.6
Monitor:
Select "Close" coil circuit monitoring to on or off
Off, On
Off
Function:
Select logic output function for Output Trip2
OR, AND, NOR, NAND, disable
Disable
Dropout:
Select relay state after trip occurs
Latched, unlatched, off delay
Unlatched
Off Delay (c):
select delay for Trip2 Relay to dropout after trip
event clears
1
0 to 600 cycles
(1 cycle increments)
0
IN1:
Select logic input IN1 for Output Trip2
*See Logic Input Options Table 18
Unused
IN2:
Select logic input IN2 for Output Trip2
*See Logic Input Options Table 18
Unused
IN3:
Select logic input IN3 for Output Trip2
*See Logic Input Options Table 18
Unused
IN4:
Select logic input IN4 for Output Trip2
*See Logic Input Options Table 18
Unused
Output Rly3
Output Relay 3 Settings
5.4.6
9.2
9.6
Function:
Select logic output function for Output Rly3
OR, AND, NOR, NAND, disable
OR
Dropout:
Select relay state after trip occurs
Latched, unlatched, off delay
Latched
Off Delay (c):
Select delay for Relay to dropout after trip event
clears
1
0 to 600 cycles
(1 cycle increments)
0
IN1:
Select logic input IN1 for Output Rly3
*See Logic Input Options Table 18
Trip, BF
IN2:
Select logic input IN2 for Output Rly3
*See Logic Input Options Table 18
Unused
IN3:
Select logic input IN3 for Output Rly3
*See Logic Input Options Table 18
Unused
IN4:
Select logic input IN4 for Output Rly3
*See Logic Input Options Table 18
Unused
Output Rly4
Output Relay 4 Settings
5.4.6
9.2
9.6
Function:
Select logic output function for Output Rly4
OR, AND, NOR, NAND, disable
Disable
Dropout:
Select relay state after trip occurs
Latched, unlatched, off delay
Unlatched
Off Delay (c):
Select delay for Relay to dropout after trip event
clears
1
0 to 600 cycles
(1 cycle increments)
0
IN1:
Select logic input IN1 for Output Rly4
*See Logic Input Options Table 18
Unused
IN2:
Select logic input IN2 for Output Rly4
*See Logic Input Options Table 18
Unused
IN3:
Select logic input IN3 for Output Rly4
*See Logic Input Options Table 18
Unused
IN4:
Select logic input IN4 for Output Rly4
*See Logic Input Options Table 18
Unused
Output Rly5
Output Relay 5 Settings
5.4.6
9.2
9.6
Function:
Select logic output function for Output Rly5
OR, AND, NOR, NAND, disable
OR
Dropout:
Select relay state after trip occurs
Latched, unlatched, off delay
Off Delay
Off Delay (c):
Select delay for Relay to dropout after trip event
clears
1
0 to 600 cycles
(1 cycle increments)
10
IN1:
Select logic input IN1 for Output Rly5
*See Logic Input Options Table 16
Breaker,
Close Bkr
IN2:
Select logic input IN2 for Output Rly5
*See Logic Input Options Table 16
Unused
IN3:
Select logic input IN3 for Output Rly5
*See Logic Input Options Table 16
Unused
IN4:
Select logic input IN4 for Output Rly5
*See Logic Input Options Table 16
Unused