![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779083.webp)
IB02602004E
For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008
Page
83
Instructions for the FP-6000 Protective Relay
Table 17. Programmable Logic (continued).
DISPLAY SETTING
DESCRIPTION
SETPOINT RANGE/ VALUE
SELECTION
DEFAULT
SETTING
SELECTED
VALUE
REFER TO SEC. #
Timer Gate 1
Timer gate 1 Settings
5.4.7
9.3
9.6
Set Group:
Select protection setting group for Timer Gate to apply 1, 2, 3, 4 or All
1
In:
Logic input
*See Logic Input Options Table 18
Unused
Delay Unit:
Select if the delay is based on cycles or seconds
Cycle, Second
Cycle
On Delay (c):
Select timer gate on delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Off Delay (c):
Select timer gate off delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Timer Gate 2
Timer gate 2 Settings
5.4.7
9.3
9.6
Set Group:
Select protection setting group for Timer Gate to apply 1, 2, 3, 4 or All
1
In:
Logic input
*See Logic Input Options Table 18
Unused
Delay Unit:
Select if the delay is based on cycles or seconds
Cycle, Second
Cycle
On Delay (c):
Select timer gate on delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Off Delay (c):
Select timer gate off delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Timer Gate 3
Timer gate 3 Settings
5.4.7
9.3
9.6
Set Group:
Select protection setting group for Timer Gate to apply 1, 2, 3, 4 or all
1
In:
Logic input
*See Logic Input Options Table 18
Unused
Delay Unit:
Select if the delay is based on cycles or seconds
Cycle, Second
Cycle
On Delay (c):
Select timer gate on delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Off Delay (c):
Select timer gate off delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Timer Gate 4
Timer gate 4 Settings
5.4.7
9.3
9.6
Set Group:
Select protection setting group for Timer Gate to apply 1, 2, 3, 4 or All
1
In:
Logic input
*See Logic Input Options Table 18
Unused
Delay Unit:
Select if the delay is based on cycles or seconds
Cycle, Second
Cycle
On Delay (c):
Select timer gate on delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Off Delay (c):
Select timer gate off delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Timer Gate 5
Timer gate 5 Settings
5.4.7
9.3
9.6
Set Group:
Select protection setting group for Timer Gate to apply 1, 2, 3, 4 or All
1
In:
Logic input
*See Logic Input Options Table 18
Unused
Delay Unit:
Select if the delay is based on cycles or seconds
Cycle, Second
Cycle
On Delay (c):
Select timer gate on delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Off Delay (c):
Select timer gate off delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Timer Gate 6
Timer gate 6 Settings
5.4.7
9.3
9.6
Set Group:
Select protection setting group for Timer Gate to apply 1, 2, 3, 4 or All
1
In:
Logic input
*See Logic Input Options Table 18
Unused
Delay Unit:
Select if the delay is based on cycles or seconds
Cycle, Second
Cycle
On Delay (c):
Select timer gate on delay
0 to 9999 cycles/second
(1 cycle/second increments)
0
Off Delay (c):
Select timer gate off delay
0 to 9999 cycles/second
(1 cycle/second increments)
0