![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779056.webp)
Instructional Literature
Page
56
Effective: May 2008
Instructions for the FP-6000 Protective Relay
For more information visit: www.eaton.com
IB02602004E
Display 17. Status/Control.
4.6.5 Reset
The
“Reset”
pushbutton has three
major functions:
1. To reset the display to the default
metering screen. When the
display is in another mode than
the metering screen, pushing
Reset button will bring the
display to the metering screen.
2. To cancel a control/operation
action. When a control/operation
action is required to be
confirmed, pushing the Reset
button will cancel the action.
3. To reset LEDs, trip, alarm,
lockout, energy, history log, and
etc.
Display 18. Reset Menu.
4.6.6 Set
The
“Set”
pushbutton can be
accessed through the security door
on the front panel (see Figure 8).
Once the
“Set”
pushbutton is
activated, a password screen will
show up on the display. The
password must be entered to change
the FP-6000 settings. To enter the
password, use the “single”
Up/Down
arrow pushbutton to
change the selected character of the
password and use the “double”
Up/Down
arrow pushbutton to
change the value of the character.
Once the password is entered, the
user must then press the
“Enter”
pushbutton to enter the password
and to activate the setting screens.
See Section 5 for a complete
description of the FP-6000 product
settings.
4.6.7 Test
The
“Test”
pushbutton can be
accessed through the security door
on the front panel (see Figure 8).
Once the
“Test”
pushbutton is
activated, a password screen will
show up on the display. The default
password is “0000.” Press
Enter
to
enter the “Test Mode.” The “Test
Mode” allows the user to initiate
current simulation tests, operate
output relays, open or close the
breaker, and test the Zone
Interlocking outputs. See Section 11
for complete details on the “Test
Mode” operation.
Status/Control
S
tatus
Control
V
ersion
Copyright
Status
S
elf Test
S
tatus
A
ctive
S
et Group:
1
Input
S
tatus
Output
S
tatus
Logic
S
tatus
Pickup
S
tatus
Trip
S
tatus
S
ystem
A
larm
S
tatus
Breaker
S
tatus
Direction Units
S
ync Control
A
larm Causes
Control
S
el
A
ctive
S
et Grp
Default
S
ettings
Trigger Datalogger
Trig Waveform Capt
Version
Boot Code
A
pplication
Comm
V
ersion
Copyright 2001
Eaton Corporation
A
ll Rights Reserved
A
R Control
S
tatus
Display
Display Meaning
Trip
Clear the Trip LEDs
Alarm
Clear the Alarm LED
BKR Lockout
Reset the Breaker Lockout Flag
Slow BKR Alm
Clear the Breaker Time Alarm
AR Lockout
Clear the Autoreclose Lockout Flags
Relay
Reset the Output Relay Contact
Menu
Peak Demand Values Reset the Output Relay Contact
Menu
Min/Max Values
Reset the Min/Max Values Menu
History Log
Reset the History Log Menu
Datalog
Reset the Datalog
Energy
Reset the Energy values
Display
Reset the Display to the default
screen
Diag Warnings
Clear the diagnostic warnings
Reset Logic Latches
Reset the Logic Latches
Clear Waveform Lock Clear the Waveform Buffer Lock