![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fp-6000-series/cutler-hammer-fp-6000-series_instructions-manual_4035779205.webp)
IB02602004E
For more information visit: www.eaton.com
Instructional Literature
Effective: May 2008
Page
205
Instructions for the FP-6000 Protective Relay
Figure 89. Flash Programmer.
The FP-6000 will display Flash Loader Mode “App code erased.”
If a user chooses not to erase the FP-6000 and proceed with the
program downloading, the FP-6000 will not allow the new
program to be entered unless the memory has been erased.
Screen messages will appear instructing the user how to
proceed. If the user selects “Exit Flash Loader” the program is
aborted. If the user selects “Program” the unit will begin to
program if its memory has been erased. If the memory has not
been erased a message will appear instructing the user to erase
before programming.
Now the user can push the Program button to start downloading
the application code process. A new screen will appear with
instructions to “Click Program to download the application code”,
(see Figure 90).
Figure 90. Flash Program Operation.
The FP-6000 will display Flash Loader Mode “BlankCheck Pass”.
A % complete bar will appear at the bottom of the screen.
Pressing the Program button will begin downloading the new
application code and begin to fill the % complete bar from left to
right indicating the status of the programming process, (see
Figure 90).
Figure 91. Flash Program Operation.
The FP-6000 will display Flash Loader Mode “Program in
progress”.
If the user chooses to abort the programming he can do so at any
time. He must then push the close button, which will activate the
previous screen.
The user can then choose to erase which will then allow him to
reprogram or exit the program.
Using the close button will close the program, and display the
screen as shown in Figure 89. The user can either exit the
FlashLoader Program or continue.
Once the program has been loaded the user will be instructed to
exit the flash load mode by pushing the “Exit Flash Loader
Mode” pushbutton, (see Figure 92).