Dräger Julian, Руководство по эксплуатации

Страница: 138 / 148

Note: Specifications are given conforming to ISO 5369.
Environmental Conditions
In operation:
Temperature 10 to 35
°
C (50 to 95
°
F)
Air pressure 700 to 1060 hPa
Rel. humidity 20 to 80 % (no condensation)
CO
2
concentration of ambient air 300 to 800 ppm
In storage:
Temperature –20 to 60
°
C (-4 to 140
°
F)
O
2
sensor max. 50
°
C (122
°
F)
Air pressure 500 to 1100 hPa
Rel. humidity <98 % (no condensation)
Performance Data
Fresh gas
(electronic mixer)
Settings: O
2
concentration
25 to 100 vol%
±
5 % of setting, at least 25 vol% or 250 mL/min
Fresh gas flow 0 and 0.5 to 12 L/min
±
10 % of setting (at 101,3 kPa atmospheric pressure)
O
2
flush >35 L/min
Ventilator
(electronically controlled, pneumatically
driven bellows in bottle ventilator)
Settings:
Pressure limit Pmax
for CMV 10 to 70 cmH
2
O
for PCV (PEEP+1) to 70 cmH
2
O
±
10 % of setting or at least
±
2 cmH
2
O
Tidal volume
for IPPV 50 to 1400 mL
±
15% of the setting for inspiration flows
≥
10 L/min.
for PCV 20 to 1400 mL
(result of the ventilation settings)
Ventilation frequency 6 to 60 per minute,
±
10 % or
±
1 per minute, the smaller value applies.
Insp/Exp. time ratio T
I
: T
E
1:4 to 2:1
±
10 % of setting
Plateau time ratio T
IP
: T
I
0 to 50 %
±
10 % of setting
Inspiratory flow (PCV) 5 to 50 L/min
±
10 %
Can be set to up to 75 L/min by DrägerService
NOTE: Depending on the scavenging flow and on the actual ventilator
settings, the open reservoir scavenging system can overflow when
setting a high inspiratory flow.
Inspiratory flow (CMV) 3 to 75 L/min
(cannot be set directly; depends on
settings for V
T
, Freq. T
I
:T
E
and T
IP
:T
I
)
PEEP 0 to 20 cmH
2
O,
±
10 % of setting or at least
±
2 cmH
2
O
Technical Data
Environmental Conditions
Performance Data
Operating Instructions Julian SW 3.n
138