Dräger Julian, Руководство по эксплуатации

Страница: 115 / 148

The parts should preferably be cleaned and disinfected in a parts washing/disinfection unit, or by immersion.
Julian and its components must not be treated with formaldehyde vapors or ethylene oxide!
115
Sterilization
Washing machine
2)
93
°
C 10 minutes
Wiping
3)
Immersion
3)
Steam, 134
°
C
(273 ºF), 10 min.
no outside no no
no outside no no
no yes no no
yes yes no yes
yes no possible yes, max. 25 times
yes no possible yes
yes no possible yes
yes no possible yes
yes no possible yes
yes no possible yes
yes no possible yes
yes no possible yes
no outside
4)
no yes, max. 10 times
no outside possible
5)
no
yes no possible no
no yes no no
yes no possible yes
yes no possible no
yes no possible no
yes no possible no
yes no possible yes
2) Only use cleaning agents, no alkaline or chlorine-releasing substances. Risk of corrosion!
3) Surface disinfectants based on aldehydes, alcohols and quaternary ammonium compounds, such
as PaMo dur rapid or PaMo sept (Dräger Parts&More GmbH) can be used to ensure compatibility.
4) Do not use any agents containing alcohol.
5) Disinfect the flow sensor in 70% ethanol solution for approximately1 hour and leave to dry in air for
at least 30 minutes.