Digi TransPort LR54, Руководство пользователя

Страница: 521 / 1113

Virtual Private Networks (VPN) OpenVPN
LR54 User Guide 521
(config vpn openvpn client openvpn_client1)> surelink success_condition
value
(config vpn openvpn client openvpn_client1)>
Where value is either one or all .
9. Set the number of probe attempts before the WAN is considered to have failed:
(config vpn openvpn client openvpn_client1)> surelink attempts num
(config vpn openvpn client openvpn_client1)>
The default is 3 .
10. Set the amount of time that the device should wait for a response to a probe attempt before
considering it to have failed:
(config vpn openvpn client openvpn_client1)> surelink timeout value
(config vpn openvpn client openvpn_client1)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number { w|d|h|m|s }.
For example, to set timeout to ten minutes, enter either 10m or 600s :
(config vpn openvpn client openvpn_client1)> surelink timeout 600s
(config vpn openvpn client openvpn_client1)>
The default is 15 seconds.
11. Configure test targets:
a. Add a test target:
(config vpn openvpn client openvpn_client1)> add surelink target end
(config vpn openvpn client openvpn_client1 surelink target 0)>
b. Set the test type:
(config vpn openvpn client openvpn_client1 surelink target 0)> test
value
(config vpn openvpn client openvpn_client1 surelink target 0)>
where value is one of:
n
ping : Tests connectivity by sending an ICMP echo request to a specified hostname
or IP address.
l
Specify the hostname or IP address:
(config vpn openvpn client openvpn_client1 surelink target
0)> ping_host
host
(config vpn openvpn client openvpn_client1 surelink target
0)>