Digi TransPort LR54, Руководство пользователя

Страница: 295 / 1113

Wi-Fi Isolate Wi-Fi clients
LR54 User Guide 295
d. Create a firewall filter to drop traffic from the Internal zone (used by the LAN1 interface)
to the LAN2_isolation_zone :
i. Click Firewall > Packet filtering .
ii. For Add packet filter , click

.
iii. For Label , type Drop traffic from Internal to LAN2_isolation_zone .
iv. For Action , select Drop .
v. For Source zone , select Internal .
vi. For Destination zone , select LAN2_isolation_zone .
e. Rearrange the firewall filters.
Firewall filters are applied in the order that they are listed. As a result, in order to drop
traffic from the
Internal zone to the LAN2_isolation_zone , this filter must be listed prior
to the Allow all outgoing traffic filter , which allows the Internal zone to have access to
any zone.
To move the Drop traffic from Internal to LAN2_isolation_zone filter to the top of the
list:
i. Click the filter title.
ii. Drag-and-drop the filter to the top of the list.
4. Create a new LAN:
By default, the LR54W device comes with one preconfigured LAN, which includes the default
access points. We will use that LAN for the
Digi AP (Wi-Fi1) access point, and create a new LAN
for the Digi AP (Wi-Fi2) access point. In this step, we create a new LAN for the Digi AP (Wi-Fi2)
access point; in the next step, we will remove the Digi AP (Wi-Fi2) access point from the
default bridge (and thus from the default LAN).