Digi TransPort LR54, Руководство пользователя

Страница: 558 / 1113

Virtual Private Networks (VPN) L2TP
LR54 User Guide 558
d. Set the IP address to assign to the remote peer:
(config vpn l2tp lns lns_server)> remote_address IP_address
(config vpn l2tp lns lns_server)>
e. (Optional) Set the authentication method:
(config vpn l2tp lns lns_server)> auth method
(config)>
where method is one of the following:
n
none : No authentication is required.
n
auto : The device will attempt to connect using CHAP first, and then PAP.
n
chap : Uses the Challenge Handshake Authentication Profile (CHAP) to authenticate.
n
pap : Uses the Password Authentication Profile (PAP) to authenticate.
n mschapv2 : Uses the Microsoft version of the Challenge Handshake Authentication
Profile (CHAP) to authenticate.
If auto , chap , pap or mschapv2 is selected, enter the Username and Password required
to authenticate:
(config vpn l2tp lns lns_server)> username username
(config vpn l2tp lns lns_server)> password password
(config vpn l2tp lns lns_server)>
The default is none .
f. (Optional) Set the metric for the tunnel:
(config vpn l2tp lns lns_server)> metric int
(config vpn l2tp lns lns_server)>
where int is an integer between 0 and 65535 . The default is 1 .
g. Set the firewall zone for the tunnel. This is used by packet filtering rules and access control
lists to restrict network traffic on the tunnel.
i. Use the ? to determine available zones:
(config vpn l2tp lns lns_server)> zone ?
Zone: The firewall zone assigned to this tunnel. This can be used
by packet
filtering rules and access control lists to restrict network
traffic on this
tunnel.
Format:
any
dynamic_routes
edge
external
hotspot
internal